Loading ...
Loading ...
Loading ...
12
5. Depress the trigger switch (Fig. 13). If inating, the air
pressure will appear on the gauge as the item is being
inated.
6. To turn the inator OFF, press the trigger switch
(Fig. 13).
7. Remove the thread connector from the tire quickly,
and replace valve stem cap on tire, if required.
NOTE: The rapid inator will stop automatically when the
desired pressure is reached. Please press trigger to shut
o the machine before removing the air chuck.
NOTE: If you disconnect the air chuck without pressing
the trigger to turn o the machine, the rapid inator will run
an additional 60 seconds before shutting o automatically.
mCAUTION!
Connector may be hot. Use caution when removing.
mWARNING! To avoid over-ination of tires, please check the
recommended tire pressure in the vehicle’s owner’s manual.
For bicycle tires, check markings on tire. Use a separate pressure
gauge for a more accurate reading.
mCAUTION! The LCD display must turn on before operating
the rapid inator. Please read and understand the instructions provided
in the manual prior to operation.
Lock-On Function
The rapid inator is equipped with a lock-on feature, which is
convenient for continuous inating for extended periods of time.
1. To lock on, depress and hold the trigger switch (Fig. 13).
2. Release the trigger switch and the rapid inator will
continue running.
3. To release the lock, press the trigger switch down to stop
(Fig. 13).
Duty Cycle
1. For household use only.
2. The rapid inator is designed for occasional use. Ination
over a long period will overheat the rapid inator and may
cause damage.
3. The rapid inator should not operate for more than
5 minutes at a time, after which it must be switched o
and allowed to cool down for at least 10 minutes before
restarting.
Storage
Air Hose + Adapters Storage
1. When the rapid inator is not in use, press the hose into
the storage area on top of the tool (Fig. 14).
2. Adapters provided with the rapid inator can be placed in
the storage area located on both sides (Fig. 15).
3. Store the tool and all accessories into the storage bag
(Fig. 16).
Fig. 13
Trigger switch
Fig. 14
Air hose
storage
Fig. 15
Adapter
storage
area
Fig. 16
Storage
bag
Loading ...
Loading ...
Loading ...