Loading ...
Loading ...
Loading ...
English
In addition to two packets of descaling powder, the kit also includes a
water hardness tester to help you determine the proper schedule for des-
caling your machine in normal use. The amount of scale that develops
depends on the hardness of the water used, but also the level of use.
The schedule indicated by the water hardness tester is a general guide-
line only. Keep in mind that you may have to descale more frequently than
indicated.
If in doubt, it is recommended to descale every month.
DESCALING THE MACHINE
n Empty the tank and replace.
n Follow the instructions for using the Krups descaling powder inside
the kit.
n Then insert the filter holder (without espresso grounds) and lock into
place by turning to the right.
n Place a container under the steam wand to catch the water.
n Press the button to turn the machine on, and then immediately turn
the dial to the position, without stopping at the position).
n Let the mixture run through the nozzle until steam appears,
n Then turn the dial back to the position
n Place the container under the filter holder.
n Once the indicator light stops blinking, turn the dial to the position
then press on the two cup position (fig.9) several times if necessary
and let half of the remaining water run through.
n Turn the machine OFF by pressing the button and leave the dial at
the position. Empty the container under the filter holder and then
replace it.
n After 15 minutes, turn the machine back on.
n When the indicator light stops blinking
.
Let the rest of the water
run through until the water tank is empty.
n Then turn the dial to the position.
DESCALING FREQUENCY
Avg. number of
uses per week
Soft water
(<19°th)
Hard water
(19-30°th)
Very hard water
(>30°th)
Less than 7 Once a year Every 8 months Every 6 months
From 7 to 20 Every 4 months Every 3 months Every 2 months
Over 20 Every 3 months Every 2 months Every month
21
IFU_KR_XP4600_nafta_NC00026259-01 18/11/11 13:51 Page21
Loading ...
Loading ...
Loading ...