Loading ...
Loading ...
Loading ...
10 | nuwavenow.com
On/Off Function:
1. Press “ON/OFF” once to turn on. “0”
will be displayed.
2. Press “ON/OFF” again to turn the
unit off.
Watts Function:
1. The default wattage is set to 1500.
Press “watts” repeatedly to switch to
600, 900, and back to 1500 watts.
• When you turn unit off and on
again, the previous watts selected
will remain in the Wok until
changed.
F/C Function:
1. Press “stage” and “watts”
simultaneously until you see “F” or
“C” ashing.
2. Press “stage” to switch from “F” to
“C” and vise versa.
3. Press “on/off” to complete the
selection.
Pause/Clear Function:
1. Press “pause/clear” once to pause
the unit.
• The temperature selected will be
displayed and “F” will be ashing.
• If have selected “TIME” and you
press “pause”, “TIME” will not
be ashing.
• To resume cooking, press “start”.
2. Press “pause/clear” again to clear
any program out.
Quick Start:
1. After you turn the unit on, press
“start” on the dial. “375F” and
“TEMP” will be displayed and the
countdown will begin.
• The Wok is defaulted to 375F for
20 minutes.
Temperature Function:
Simply turn the dial to decrease or increase
temperature.
• Located on the left dial.
• Temperature range 100-575F in
5-degree increments.
INSTRUCTIONS
Time Function:
Simply turn the dial to decrease or increase
time.
• Located on the right dial.
• Time range is from 1 minute to 9 hours
and 59 minutes (Time is in Hours and
Minutes).
Stage Function:
1. Press “stage”. “STAGE” will be
ashing and “1”, “TIME”, and “00:00”
will be displayed.
2. Set time and adjust temperature, if
needed.
3. Press “stage” again. “STAGE” will
be ashing and “2”, and “TIME”, and
“00:00” will be displayed.
4. Set time and adjust temperature, if
needed.
5. Repeat steps, if necessary.
• You can create up to 10 stages.
Stage 10 will display as “0”.
6. Press “start”.
Preheat Function:
1. Press “preheat”. “PREHEAT” and
“375F” will be displayed.
2. Adjust time and adjust temperature,
if needed.
• Preheat program has a default of
375F for 20 minutes.
3. Press “start”. Selected temperature
and “F” will be ashing.
4. Once the temperature you selected
has been reached, “selected
temperature” and “ready” will be
displayed indicating the Wok will
hold that temperature for 5 minutes
or until you press “start”.
5. Once you press “start”, the
countdown you selected will begin
with the programmed temperature.
• If you press “pause” when the
unit is preheating, “5” will be
ashing, indicating the Wok will
hold the program for 5 minutes or
until you press “start”.
Loading ...
Loading ...
Loading ...