Loading ...
Loading ...
Loading ...
7
BATTERY LEVEL:
White colour: 100% - 70% charge
Blue colour: <70% - 40% charge
Red colour: <40% - 10% charge
Red blinking: <10% charge
There are 2 methods of charging:
Charge the battery when fitted to the product.
Insert the battery charger jack to the battery. The LED status indicator will illuminate RED when charging. When charging
is complete, the LED status indicator will illuminate WHITE for 1 min then switch off. [7]
Charge the battery when removed from the product.
Remove the battery from the product by pressing the battery release buttons.
Insert the battery charger jack to the battery. The battery pack LED will illuminate RED when charging. When charging is
complete, the LED indicator will illuminate WHITE. [8]
NOTE: It is normal for the charger to become warm to touch when charging. Use only the charger supplied with your
product.
ACCESSORIES
CREVICE TOOL INTEGRATED ON THE HANDHELD, CREVICE TOOL INTEGRATED ON THE TUBE, 2IN1 FURNITURE TOOL
& DUSTING BRUSH AND MINI TURBO NOZZLE.
Integrated Crevice Tools - ideal for accessing tight spaces.
Dusting Brush - ideal for cleaning surfaces without damaging or scratching.
Furniture Nozzle - ideal for cleaning surfaces like sofa.
All the accessories can be fitted on the main product and on the tube. [4]
NOTE: The mini-turbo nozzle is ideal for deep cleaning textile surfaces (i.e. sofas) and pet hair removal. Move it steadily backwards
and forwards. After using, please remove hair / threads collected on the brush with scissors if necessary.
ACCESSORY BAG*
Accessories can be stored in the accessory bag.
Wall Mount*
Hang the wall mount to the wall, using the two screws included in the product to hang product
[2].
CLEANER MAINTENANCE
Pre-filter maintenance reminder. If the pre-filter needs maintenance, the red light on the cleaner starts to blink in red colour.
Emptying the Dust Container
1. Press the main body release button and remove the tube. [5]
2. Press the dust cup empty button to release the bin ap and empty the contents. [9]
3. Close the dust cup ap, you will hear a click when fully locked.
NOTE: It is recommended to empty the dust cup after each use or when dust is up to the max fill line.
Cleaning the Dust Container and Filter
The LED indicator on the product will ash RED to indicate the cleaning Pre-motor Filter is required.
1. Press the handheld release button and remove the handheld unit from the tube. [5]
2. Press the battery release button and remove the battery.
3. Remove the dust bin assembly by turning it clockwise and pulling away from the unit. [10]
4. Remove the Pre-Motor lter pulling the support from the bin assembly.[11a]
5. Remove the single cyclone system pulling the metal ring from the bin assembly.
6. Remove vortex nder by rotating clockwise and pull from the cyclone system. [11b]
7. Wash the lter and single cyclone system in lukewarm water and leave to dry for 24 hours. [12,13]
8. Reassemble once completely dry and ret to the product.
NOTE: Do not use hot water or detergents when cleaning the pre-motor filter. In the unlikely event of the pre-motor filter
becoming damaged, fit a genuine Hoover replacement. Please ensure you refit the pre-motor filter before assembling dust
bin to cleaner main body as filter protection mechanism will be activated.
IMPORTANT: For optimum performance, always keep your filter clean. We recommend that the filter should be
washed at least once a week.
* Certain Models Only
Loading ...
Loading ...