Loading ...
Loading ...
Loading ...
5
1. SELECT BLOWER OPTION AND INSTALL DUCTWORK
8” ROUND
DUCT
ROOF CAP
24” TO 36”
ABOVE COOKING SURFACE
WALL
CAP
HOOD
DECORATIVE
FLUE
OR SOFFIT
12”
HH0209A
10” ROUND
DUCT
ROOF CAP
24” TO 36”
ABOVE COOKING SURFACE
WALL
CAP
HOOD
DECORATIVE
FLUE
OR SOFFIT
12”
HH0210A
MODEL iQ6, P3 OR P6
SINGLE INTERIOR BLOWER
TYPICAL DUCTWORK
MODEL iQ12 OR P12
DUAL INTERIOR BLOWER
TYPICAL DUCTWORK
HH0211A
EXTERIOR BLOWER
EXTERIOR
BLOWER
10” ROUND
DUCT
24”
TO 36”
ABOVE COOKING SURFACE
HOOD
DECORATIVE
FLUE
OR SOFFIT
12”
HH0212A
IN-LINE BLOWER
10” ROUND DUCT
(
EXCEPT HLB3, 8’’ ROUND DUCT)
24” TO 36”
ABOVE COOKING SURFACE
ROOF CAP
WALL
CAP
HOOD
MODEL EB6, EB9, EB12 OR EB15
EXTERIOR BLOWER TYPICAL DUCTWORK
MODEL ILB3, ILB6, ILB9 OR ILB11
IN-LINE BLOWER TYPICAL DUCTWORK
Either an interior or exterior blower or in-line blower may be used with this hood. The Best WP28M Series must be installed with blower
models iQ6, P3, P6, iQ12, P12, ILB3, ILB6, ILB9, ILB11, EB6, EB9, EB12 or EB15 only.
Other blowers cannot be substituted. (Blowers sold separately.)
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1 up to 7, 10 to 12, 15 and up of this
manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. Use metal duct tape to seal duct joints.
NOTE: It is recommended that there be a minimum of 6” of straight duct from this hood to an elbow for 8” ducting and 12” for 10” ducting.
Loading ...
Loading ...
Loading ...