Loading ...
Loading ...
Loading ...
5
7. Play/Pause: Press to play or pause a track from a connected Bluetooth device.
Tip: If you would like to disable (or enable) the voice prompts, press and hold this button
for 5 seconds.
8. Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the
previous/next track on a Bluetooth connected device. To “seek” (jump to the next available
station), hold either button down for a few seconds until it starts to seek a station. The unit
will remember the last station it was on and start at that station when powered off and on
again.
9. Lights: Press this button to select how the lights function:
• Color Cycle: The lights slowly glow and cycle through colors. Press and hold the light
mode button to freeze the lights on one color.
• Beat Sync: The lights react to the beat of the music. If there is no music playing, the
lights will cycle through colors.
• Off: The lights turn off.
10. Sound FX: Press these buttons to trigger Sound FX. Sound FX will interrupt Bluetooth
audio and mix over the radio, aux input and mic input.
11. FX Bank: Press this button to switch between banks of Sound FX.
12. Auxiliary Input: This stereo 1/8” (3.5 mm) input can be used to connect a CD player, MP3
player, or other audio source.
13. Microphone Input with Volume Control (1/4”): Connect the included 1/4" (6.35 mm)
microphone with cable to this input. Adjust the knob to control the volume.
14. Master Volume Control: This adjusts the speaker’s main mix volume, which includes the
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
15. USB Charging Port: Connect your device’s charge cable here to charge it. USB charging
only functions when the unit’s power is turned on.
Loading ...
Loading ...
Loading ...