Loading ...
Loading ...
Loading ...
6
Top Panel
1. NFC: Tap your NFC (near-field communication) supported and enabled device
here to pair your phone by gently bumping on the “N” logo.
Rear Panel
1. Power Cable Input: Insert the included power cable here to charge
the unit. Note that the Tailgater Plus can be used with the power
cable while it simultaneously charges the battery.
Operation
Using the Radio
Selecting a radio station:
1. Press the Radio button to select AM (North America/Canada only) or FM.
2. Press either of the Tune/Track buttons to select a radio station. To “seek” (jump to the next
available station), hold either button down for a few seconds until it starts to seek a station.
Saving a radio station as a preset:
1. Press the Radio button to select AM (North America/Canada only) or FM.
2. Press either of the Tune/Track buttons to select a radio station.
3. Press and hold the Presets button for two seconds to enter Preset mode.
4. Press either of the Tune/Track buttons to select a preset location.
5. Press the Presets button to save to the selected location.
Recalling a saved radio station preset:
1. Press the Radio button to select AM (North America/Canada only) or FM.
2. Press the Presets button repeatedly to cycle though the saved presets.
Pairing a Bluetooth Device
1. Turn on your Bluetooth device.
2. Power on Tailgater Plus. If you have previously connected to another Bluetooth device, Tailgater
Plus will reconnect. To disconnect pairing if the Bluetooth icon is lit solid, press and release the
Bluetooth button.
3. Navigate to your Bluetooth device’s setup screen, find Tailgater Plus and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
4. To disconnect pairing while the Bluetooth icon is lit solid, press and release the Bluetooth
button.
5. To connect to another Bluetooth device, repeat step 3.
1
1
Loading ...
Loading ...
Loading ...