Loading ...
Loading ...
Loading ...
INSTALLATION PREPARATION
INSTALLATION PREPARATION
6
DRAIN PREPARATION
Do local codes or ordinances require an air gap?
Will waste tee or disposer connection be less than 18" above the
юVVY&
>PSSPUZ[HSSH[PVUOH]LHKYHPUSVVWSLZZ[OHUHIV]LюVVY&
The type of drain installation depends on answers to the following
questions:
CABINET PREPARATION
Drill a 1-1.5'’dia. hole in the cabinet wall within the shaded areas
shown in Figure A for the drain hose connection. The hole should
be smooth with no sharp edges.
If the answer to ANY of the 3 questions above is YES, Method 1
MUST be used. Otherwise either Method 1 or Method 2 may be used.
Figure C or Figure D.
Figure B
Figure C
Method 1 -Air Gap with Waste Tee or Disposer
Method 2 -High Drain with Waste Tee or Disposer Provide a method
to attach drain hose to underside of countertop.
Install waste tee or disposer and air gap according to manufacturer’s
instructions.
An air gap MUST BE USED if the drain hose is connected to
^HZ[L[LLVYKPZWVZLYSV^LY[OHUHIV]L[OLюVVY
Failure to provide the proper drain connection height with air
gap or 32" minimum, high drain loop will result in improper
draining of the dishwasher.
CAUTION:
32"
32"
18"
Min.
Min.
Min.
18"
Min.
Loading ...
Loading ...
Loading ...