Loading ...
Loading ...
Loading ...
22
1. Place a sturdy measuring cup (1 cup [237 mL] size) on the
dispenser tray centered in front of the ice/water dispenser
paddle.
NOTE: Depending on your model, a measuring cup may be
provided.
A. Water dispenser paddle
B. Ice dispenser paddle
C. Measuring cup (1 cup [237 mL])
B
A
C
Ensure that you do not have any Measured Fill preset
selected.
2. Touch and hold the MEASURED FILL button for 3 seconds to
enter into Calibration mode. The Calibration and Measured
Fill icons will illuminate and remain lit while the Measured Fill
feature is being calibrated.
NOTE: You may touch Measured Fill to exit at any time in
Calibration mode. The “Calibration” and “Measured Fill” icons
will disappear.
3. Press and hold the water dispenser paddle, as needed, to
dispense water to the 1 cup (237 mL) ll line in the measuring
cup.
NOTE: If overlling or spilling occurs, discard the water and
restart the calibration process.
4. When 1 cup (237 mL) of water has been correctly dispensed
into the measuring cup, touch MEASURED FILL to conrm
the calibration.
5. When Measured Fill calibration has been conrmed, the
“Calibration” icon will disappear and the display will return
to the home screen.
Save Favorite Fill
Household water pressure may affect the accuracy of the
Favorite Fill feature. So, for optimum performance of your water
dispenser, you must rst calibrate Measured Fill.
IMPORTANT:
■ Flush the water system before saving Favorite Fill.
■ For best results, calibration should be performed when
water is not being used in the house.
1. Place a preferred-size cup on the dispenser tray centered in
front of the ice/water dispenser paddle.
Water and Ice Dispensers
IMPORTANT:
■ Allow 3 hours for the refrigerator to cool down and chill water.
■ Allow 24 hours to produce the rst batch of ice. Discard the
rst three batches of ice produced.
■ The dispensing system will not operate if the left-hand
refrigerator door is open.
B
A
A. Water dispenser paddle
B. Ice dispenser paddle
Flush the Water System
Air in the water dispensing system can cause the water dispenser
to drip. After connecting the refrigerator to a water source or
replacing the water lter, ush the water system.
Flushing the water dispensing system forces air from the water
line and lter and prepares the water lter for use. Additional
ushing may be required in some households.
NOTE: As air is cleared from the system, water may spurt out of
the dispenser.
1. Using a sturdy container, depress and hold the water
dispenser paddle for 5 seconds.
2. Release the dispenser paddle for 5 seconds. Repeat steps
1 and 2 until water begins to ow.
3. Once water begins to ow, continue depressing and releasing
the dispenser pad (5 seconds on, 5 seconds off) until a total
of 3 gal. (11.4 L) has been dispensed.
Calibrate Measured Fill
Household water pressure may affect the accuracy of the
Measured Fill feature. So, for optimum performance of your water
dispenser, you must rst calibrate Measured Fill.
IMPORTANT:
■ Flush the water system before calibrating Measured Fill.
■ For best results, calibration should be performed when water
is not being used in the house.
Loading ...
Loading ...
Loading ...