Loading ...
Loading ...
Loading ...
CHANGING THE BELT OR BRUSHES CLEARING A BLOCKAGE
If your cleaner is not picking up efciently, the belt or brushes (or both) may need replacing, but rst
please make sure you have:
• Emptied the bin
• Cleaned the lters
• Checked for blockages
Turn the cleaner over and remove 2 rear
rollers and 2 retaining screws.
Remove the brush guard.
Hold the brush assembly and stretch the
belt until the brush can be slotted back
into the cleaner housing.
Rotate the brush to ensure free movement
of the belt.
Refit the brush guard with 2 retaining screws
and 2 rear rollers..
1 4
2
3
5
6
Check the cleaning
tools and hose for
blockages.
The hose can be
removed at both ends.
Turn the cleaner
over and rotate the
brushes to identify
any obstructions
including hair.
Check for a blockage in
the hose socket. Use a
flexible rod to remove
any obstruction.
- 6 -
*Certain models only
Remove brush assembly and check for
wear on the belt.
Loop the new belt around the
motor and brush channel.
GB
NOTE: When the brush was blocked and stopped rotating,switch off and remove the plug from
the electricity supply,then use a pair of scissors to cut through any threads or hairs caught
around the brush. Reassemble the brush and brush guard.
Removing a blockage from
the mini turbo nozzle.
Open the nozzle at each
side,lift cover and remove
the blockage.
IMPORTANT: Switch the cleaner off and
remove the plug from the electricity supply
before attempting any maintenance.
Loading ...
Loading ...