Loading ...
Loading ...
Loading ...
18
Step 7. Flushing and checking for leaks
Pull the hose assembly out of the spout
and remove the spray head by unscrewing
it from the hose in a counterclockwise
direction. Be sure to hold the end of the
hose down into the sink and turn the faucet
on to the warm position where it mixes hot
and cold water. Flush the water lines for
one minute. This flushes away any debris
that could cause damage to internal parts.
Check for leaks. Re-tighten any
connections if necessary, but do not
overtighten. Reinstall the spray head by
hand tightening it back onto the spray
hose. After installation is completed, turn
on the hot and cold water supplies. Check
for leaks.
Loading ...
Loading ...
Loading ...