Loading ...
Loading ...
Loading ...
BlueParrott C400-XT User Manual
PAGE 9
GETTING STARTED
On/Off/Standby
Turn Headset On: Hold down the MFB for approximately 2-3 seconds until you hear
a voice prompt, “power on.” The red light will flash once every second.
Turn Headset Off (conserves battery power): Hold down the MFB for
approximately 4–5 seconds until you hear a voice prompt “power off.” A red light
will flash 4 times and the headset will turn off.
Standby Mode: Once the headset is turned on (after the initial pairing), it will
attempt to connect to the last device that it was paired with, putting itself into
Standby Mode.
Pairing with a Phone
When you turn your C400-XT on for the first time,
or if its Paired Device List has been cleared, it will
go into pairing mode automatically. You can pair
the headset using NFC
or manually.
NFC (One-Touch) Pairing
1. Make sure that NFC is enabled on your cell
phone.
2. Place the NFC zone of your cell phone against
the NFC zone of the headset and hold them
together until your
cell phone registers the headset.
3. Follow the prompts on your cell phone to
complete pairing.
Note:
NFC and One-Touch Pairing are dependent
on your cell phone. The size and sensitivity of your
phone’s NFC zone and the specific way to connect
the headset may vary between devices.
NFC Zone
Loading ...
Loading ...
Loading ...