Loading ...
Loading ...
Loading ...
!
18
! Proceed as follows to set a delayed start:
- Select a programme.
- Press the DELAY START button (each
time the button is pressed the start will
be delayed by 3, 6 or 9 hours
respectively and the corresponding time
indicator light will light up).
- Press START/PAUSE button to
commence the delay start operation
(the indicator light associated with the
selected delay start time will blink). At
the end of the required time delay the
programme will start.
! It is possible to cancel the DELAY
START by turning the programme
selector to OFF.
! To set a timed drying, press this button
until the corresponding indicator light to
the desired duration will light on.
! It's possible transform a cycle from
automatic to timed, up to 3 minutes after
the start of the cycle.
! After this selection to reset the automatic
drying functioning is necessary to switch
off the dryer.
! In case of incompatibility, all indicator
lights flash quickly for 3 times.
! This button allows to set the desired
dryness level editable option up to 3
minutes after the starting of the cycle:
Ready to Iron: it leaves the garments
slightly wet to facilitate ironing.
Dry Hanger: to get garment ready to
be hang.
Dry wardrobe: for laundry that can be
directly stored.
Extra-dry: to get completely dry
garments, ideal for full load.
! This appliances is equipped with Drying
Manager function. On automatic cycles,
each level of intermediate drying, prior to
the reaching the selected one, is indicated
by flashing the light indicator corresponding
to the degree of drying reached.
In case of incompatibility, all indicator
lights flash quickly for 3 times.
It lights up when the START/PAUSE button
has been pressed.
The indicator lights are illuminated to show
the duration selected by the relevant button.
The indicator lights display the degrees
of dryness that can be selected by the
relevant button.
! Each time the DELAY START button is
pressed the indicator lights show how
many hours of delay you chosen (3, 6 or
9 hours) and the countdown until the end
of it.
START PAUSE indicator light
TIME CYCLE SELECTION indicator
lights
DRYING SELECTION indicator
lights
DELAY START TIME / DRYING
STAGE indicator lights
Opening of the porthole with delayed
start set, after re-closing the porthole,
press START/PAUSE again to resume
the counting.
TIME CYCLE SELECTION button
DRYING SELECTION button
Loading ...
Loading ...
Loading ...