Loading ...
Loading ...
Loading ...
Instructions for the installer
30
6. POSITION NEAR THE COUNTER TOP
The following operation requires building and/or carpentry work so must be carried out by
a competent tradesman.
Installation can be carried out on various materials such as masonry, metal, solid wood or
plastic laminated wood as long as they are heat resistant (T 90°C).
6.1 Fixing to a support structure model with traditional casing
(fig. 1)
Create an opening with the
dimensions shown in the figure in the
work surface of the piece of furniture.
1)
A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) X (mm) Y (mm)
min 150 min 460 min 750 20÷50 min 50 620 592 488
Carefully position the supplied insulating
seal on the outer edge of the hole on the
top hob, as indicated in figure 2. Try and
make it stick to the whole surface by
applying light hand pressure. The front and
back sides of the seal must be touching the
hole.
2)
Carry out this operation by supporting the
hob on the isolating seal and using screws
and clamping brackets (Fig. 3) to fix the
hob to the support structure, in order to
obtain the complete flatness.
Trim any excess trimming from border A
with care (Fig.4). The quotes in figure 2 are
references for the hole on the inside of the
trimming. The small brackets in figure 3 are
only positioned after having mounted the
hob.
3)
4)
Loading ...
Loading ...
Loading ...