Loading ...
Loading ...
Loading ...
24
Maintenance
Service Schedule
MAINTENANCE DAILY WEEKLY QUARTERLY
Check machine for cord damage *
Check recovery dome and gasket for
damage and cleanliness
*
Check brush - should be clean with no lint
or strings attached
*
Inspect vac shoe for blockage; remove
fibers with coat hanger, etc.
*
Check hoses for wear, blockages, or
damage
*
Check handles, switches, and knobs for
damage
*
Check vac motor intake filter and clean *
Run one gallon of water through system *
Clean out recovery tank and check float
valve to make sure it moves freely
*
Clean out solution tank and remove and
clean vacuum intake screen
*
Clean outside of all tanks and check for
damage
*
Run vac motor for at least one minute to
allow motor to dry
*
Store with dome off tank to allow the tank
to dry
*
Check all bearings for noise *
Check all gaskets for wear and leakage *
Check vacuum intake screen for damage;
replace if necessary
*
Check pump pressure; observe spray
pattern and check with gauge if
necessary
*
Check and clean solution screen *
Check belts for wear and replace as
necessary
*
Check brush for wear; ensure bristles are
not damaged
*
Check cables for fraying *
Check the spray bar (manifold) for
damage; replace if broken or bent
*
Check condition of vac shoe and frame
for damage
*
Check overall performance of machine *
Check vac motor carbon brushes *
86401310 Operators Manual - ADM8 115V
Loading ...
Loading ...
Loading ...