Loading ...
Loading ...
Loading ...
15
49-60811
ENGLISH
INSTALLATION INSTRUCTIONS
INSTALL THE ICE MACHINE (Cont.)
BUILT-IN INSTALLATION
If this method of installation is chosen, it will still be necessary to allow
adequate ventilation space around the ice machine.
1. Place ice machine in front of installation location. Place the ice machine
flat on the floor or on a platform depending on your installation
requirements.
2. The water supply line must be plumbed before connecting to the ice
machine.
3. Turn on main water supply and tap.
4. Check for water supply connection leaks. Tighten every connection
(including connection at the water inlet).
5. Suitable drain line must be connected for this installation.
6. If the electrical outlet for the ice machine is within the cabinet opening,
plug in the ice machine.
7. Push the ice machine into position.
IMPORTANT: Be sure to check that water supply and drain hoses cannot
get pinched or kinked or damaged before ice machine moves into its final
position.
LEVELING THE ICE MACHINE
The rolling casters on the bottom of the ice machine allow it to be moved
easily to clean and sanitize the floor underneath.
The ice machine must be level to work properly. If the ice machine is not
level the water will not flow properly through the evaporator (ice mold). The
ice production will be less than normal, and may be noisy.
The ice machine can be raised or lowered by rotating the plastic feet around
each of the four rolling casters on the bottom of the ice machine.
If you find that the surface is not level, rotate the feet until the ice machine
becomes level. You may need to make several adjustments to level it.
Place a carpenter’s level on top of the ice machine to see if the ice machine
is level from front to back and side to side.
Adjust the height of the casters as follows:
To Lower - Turn the leveling feet to the right.
To Raise - Turn the leveling feet to the left.
IMPORTANT: When the ice machine is ready to be installed in a cabinet or
directly on the floor, you must lock the casters after leveling. If the floor is
level, just turn the two front feet to touch the floor.
Loading ...
Loading ...
Loading ...