Loading ...
Loading ...
Loading ...
12
mWARNING! To prevent serious personal injury or
damage to the unit, make sure the Blower + vacuum tube is in
place before operating the unit.
Air Vents
Never cover air vents. Keep them free from obstructions
and debris. They must always remain clear for proper motor
cooling.
mWARNING! To avoid serious personal injury, do not
wear loose tting clothing or articles such as scarves, strings,
chains, ties, etc., that could get drawn into the air vents.
To make sure long hair does not get drawn into the air vents,
tie back long hair.
Blower Mode
• Hold the workshop blower + vacuum rmly with your
dominant hand on the unit handle. Sweep from side to
side with the lower tube several inches above the ground
or oor (Fig. 13).
• Slowly advance the unit, keeping the accumulated pile
of debris in front of you. Most dry blowing operations are
better suited to low speeds rather than high speeds.
High speed blowing is best for moving heavier items like
large debris or gravel.
Vacuum Mode
• Once you have blown the debris/dust into a pile,
you can convert to vacuum mode to collect the debris.
• Ensure collection bag is attached securely.
• With a rm hold on the unit, tilt the Blower + vacuum tube
2 in. – 4 in. (5 cm – 10 cm) from the ground and use a
sweeping action to collect light debris. The debris will ow
into the bag. For longer bag life and optimal performance,
empty the bag frequently.
• As the bag lls, suction power will decrease. When this
happens, use the ON/OFF trigger to turn the unit OFF
remove the battery. Remove the bag and empty the
debris.
Maintenance
mWARNING! Always wear protective gloves during
maintenance operations. Do not carry out maintenance when
the engine is running or hot.
mWARNING! Use only original manufacturer’s
replacement parts, accessories and attachments. Failure to do
so can cause possible injury and poor performance.
To order genuine replacement parts or accessories for the
Sun Joe
®
iON+ 24V-WSB-LTE-RM cordless workshop blower
+ vacuum, please visit sunjoe.com or contact the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563).
mWARNING! Remove the battery before performing any
maintenance task. If the battery is connected with the unit,
someone could accidentally turn on the unit while you are
inspecting it, which could result in serious personal injury.
1. Store the tool, instruction manual and accessories in a
secure, dry place. In this way, you will always have the
information ready at hand.
2. Keep the tool’s air vents unclogged and clean at all times.
3. Remove dust and dirt regularly. Cleaning is best done with
a rag or brush.
4. Never use caustic agents to clean plastic parts.
mWARNING! Do not use cleaning agents to clean the
plastic parts of the tool. A mild detergent on a damp cloth is
recommended. Water must never come into contact with the
tool.
Storage
1. Examine the cordless workshop blower + vacuum
thoroughly for worn, loose, or damaged parts. Should you
need to repair or replace a part, contact an authorized
Snow Joe
®
+ Sun Joe
®
dealer or call the Snow Joe
®
+
Sun Joe
®
customer service center at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
2. Remove the battery from the cordless workshop blower +
vacuum before storing.
3. Store the workshop blower + vacuum in a dry,
well-ventilated place that is inaccessible to children.
Keep away from corrosive agents.
Battery Caution + Disposal
Always dispose of your battery pack according to federal,
state, and local regulations. Contact a recycling agency in your
area for recycling locations.
mCAUTION! Even discharged battery packs contain
some energy. Before disposing, use electrical tape to cover the
terminals to prevent the battery pack from shorting,
which could cause a re or explosion.
Fig. 13
Loading ...
Loading ...
Loading ...