Snow Joe 24V-SS13-CT User Manual

Loading ...

When to Charge the iON+ 24V

Lithium-iON Battery

NOTE: The iON+ 24V lithium-ion battery packs do not develop

a "memory" when charged after only a partial discharge.

Therefore, it is not necessary to run down the battery pack

before inserting the charger plug.

• Use the battery charge indicator lights to determine when to

charge your iON+ 24V lithium-ion battery pack.

• You can "top-o" your battery pack's charge before starting

a big job or after a long day of use.

Charging the Battery

1. Press the push lock buttons on the battery to pull the

battery pack out of the equipment (Fig. 1).

2. Depending on your Snow Joe

+ Sun Joe

charger model,

how to recharge your lithium-ion battery will vary. You may

either insert your 24-volt battery into the 24VCHRG-QC

Quick Charger (sold separately) or the 24VCHRG-DPC

Dual Port Charger (sold separately) (Figs. 2 – 3).

Fig. 2

Battery pack

24VCHRG-QC

quick charger

(Sold separately)

red

Charging

green

Fully

Charged

3. The battery indicator LEDs will illuminate one by one

during the charging process. Unplug the charger

immediately when the 3 LEDs are all illuminated.

4. The 24VCHRG-QC Quick Charger (sold separately) and

the 24VCHRG-DPC Dual Port Charger (sold separately)

are also equipped with additional charging indicating

lights which will indicate the charging status (Figs. 2 – 3).

mCAUTION! FIRE HAZARD. When disconnecting the

charger from the battery, be sure to unplug the charger from

the outlet rst, then disconnect the charger from the battery.

mWARNING! This charger does not automatically turn o

when the battery is fully charged. Please take care not to leave

the battery plugged into the charger. Switch o or unplug the

charger at the mains when charging is complete.

5. Timely recharging of the battery will help prolong the

battery's life. You must recharge the battery pack when

you notice a drop in the equipment's power.

IMPORTANT! Never allow the battery pack to become fully

discharged as this will cause irreversible damage to the battery.

6. When charging is complete, remove the battery from the

charger by pulling the push lock button and sliding the

battery backward to unlock it from the charger.

Assembly

Connecting the Poles

1. Connect the upper pole assembly with the middle pole

assembly. Align the screw holes (Fig. 4).

Fig. 1

Push lock button

Fig. 3

Battery pack

24VCHRG-DPC

dual port charger