Loading ...
Loading ...
Loading ...
aus Troubleshooting
48
Home Connect problem
Fault Cause Troubleshooting
Connection to home net-
work is not established.
WLAN on router is not act-
ive.
▶
Check the wireless network con-
nection of your router.
WLAN display is flashing. Connection to home net-
work is not available.
▶
Activate the wireless network con-
nection on your router.
Home Connect cannot be
implemented correctly.
Home Connect set incor-
rectly.
▶
Please consult the documents sup-
plied for HomeConnect.
Technical fault is present.
▶
Please consult the information
about support in the documents
supplied for HomeConnect.
Information on display panel
Fault Cause Troubleshooting
Refill indicator for rinse aid
lights up.
Insufficient rinse aid. 1. Add "Rinse aid" →Page25.
2. Set the amount of rinse aid to be
dispensed.
→"Setting the amount of rinse aid",
Page26
Refill indicator for rinse aid
does not light up.
Rinse aid system is switched
off.
▶
Set the amount of rinse aid to be
dispensed.
Malfunctions
Fault Cause Troubleshooting
Water is left in the appliance
at the end of the pro-
gramme.
Filter system or area under
the filters is blocked.
1. Clean the "Filters" →Page38.
2. Clean the "Wastewater pump"
→Page51.
Programme has not yet
ended.
▶
Wait until the programme ends or
cancel the programme with Reset.
▶
→"Terminate programme",
Page32
Appliance cannot be
switched on or operated.
Software update is taking
place.
▶
Wait until the software update has
finished.
Appliance functions have
failed.
1. Pull out the mains plug or switch off
the fuse.
2. Wait at least 2minutes.
3. Connect the appliance to the power
supply.
4. Switch the appliance on.
Loading ...
Loading ...
Loading ...