Loading ...
Loading ...
Loading ...
TROUBLESHOOTING
CAUTION
DO NOT connect multiple E.FLEX 50 in series. Doing so may cause irreversible damage to
the E.FLEX 50.
To expand the output power, please connect multiple E.FLEX 50 in parallel by joining the female and male
Solar Panel Connectors of each E.FLEX 50 together with solar parallel branch connectors (not included).
If the E.FLEX 50 does not charge the device connected to it, please check the connection between the
E.FLEX 50 and the device. If all the connections are solid, please check if the Slide Switch is in the correct
position.
If the output port of the E.FLEX 50 turns on and off frequently during the charging process, please check
if the E.FLEX 50 is receiving enough sunlight and if the device is drawing a large amount of power from
the output port. The E.FLEX 50 cannot deliver more power to the device than the amount of solar power
it has captured.
If both the LED Indicator 1 and LED Indicator 2 illuminate red, one or more output ports of the E.FLEX 50
have been shut off due to over-current or short-circuit. Please connect only the devices that conform to the
specifications of output ports or remove the short circuit.
- 08 -
Loading ...
Loading ...