Loading ...
Loading ...
Loading ...
9
• External surfaces are susceptible to scratches and abrasions, so please
follow the cleaning instructions to ensure the best possible result is
achieved without damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold
especially when cleaning.Avoid leaving alkaline or acid substances
(lemon juice, vinegar etc.) on the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g.weekly) to ensure long
life expectancy.Dry with a clean soft cloth. A specialized stainless steel
cleaning fluid may be used.
NOTE:
Ensure that wiping is done along with the grain of the stainless steel to
prevent any unsightly crisscross scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure
the cloth is clean and well wrung before cleaning. Use a dry soft cloth to
remove any excess moisture left after cleaning.
Important
Using neutral detergents and avoid using harsh cleaning chemicals,
strong household detergents or products containing abrasives,as this will
affect the appliance appearance and potentially remove any printing of
artwork on the control panel and will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand.
Soak them for about 3 minute in water with a grease-loosening detergent
then brush it gently with a soft brush. Please do not apply too much
pressure, avoid to damage it . (Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and kitchen utensils. it is
advisable not to use rinse aid.
Loading ...
Loading ...
Loading ...