Loading ...
Loading ...
Loading ...
6
Before Using for the First Time
CAUTION: To protect against electrical shock, do not immerse the Coffee Maker or allow power cord to come
into contact with water or other liquids.
1. Remove all packing material and labels from the inside and outside of the Coffee Maker. Place the unit
on a at, clean surface.
2. Before preparing coffee, thoroughly clean the glass carafe with lid, removable lter holder and permanent
coffee lter in hot, sudsy water. Rinse and dry. Replace disassembled parts. See Care & Cleaning
Instructions for a detailed description.
3. Clean the inside of the Coffee Maker by brewing 2 full carafes of tap water (see “setting up the machine”).
Do not add the permanent coffee lter or ground coffee for this initial cleaning.
NOTE: At the end of the rst cycle, allow 15 minutes for the unit to cool.
4. Brew a second carafe of fresh water.
5. Wait an additional 15 minutes to allow the unit to cool before brewing your rst carafe of coffee.
Setting up the machine
IMPORTANT: Before brewing, always check to make sure water level is past the MIN line and add water
if needed. Never exceed the MAX ll line.
NOTE: The amount of brewed coffee will always be less than the amount of water placed into the water reservoir;
as much as 10% is absorbed by coffee grounds and lter.
1. Lift to open the Coffee Maker lid. Fill carafe with cold tap water and pour into water reservoir at the back
of the unit. The stepped water level indicator can be easily viewed inside unit.
2. Place empty carafe on the warming plate.
3. Place the permanent lter in the removable lter holder. Measure 1 level tablespoon or 1 scoop with the
provided scooper cup, of drip or regular grind coffee for each cup of coffee desired. For stronger or milder
coffee, adjust amount of coffee to suit your taste.
4. Lower the lter holder down into the housing. Close the lid.
5. Plug the power cord into 120V/60HZ power supply socket, the background indicator will be illuminated,
“AM 12:00
!
CLEAN
” will ash. Set the clock by using the HOUR/HR and MIN buttons, and press SEL. The
backlight indicator will go into sleep mode within 60 seconds if no further buttons are selected.
6. Press the START or
button
*
. The Coffee Maker will begin the brew cycle.
NOTE: To interrupt the brew process at any time, press and hold the START or
button
*
until you hear a
beep. The screen will display
icon and TIME since last brew. The warming plate will still be working. To
turn it off, hold START or
button
*
again until clock appears.
7. Upon completion of the brew cycle, wait at least 1 minute until the dripping coffee from the ow valve
into the carafe has stopped. The carafe lid should be kept in place to facilitate safe serving and help keep
coffee at a proper serving temperature. Tilt the carafe slightly and pour hot coffee very slowly, so that the
ow of the brewed coffee does not exceed the width of the spout.
8. Press and hold the START or
button
*
to turn the Coffee Maker off when the carafe is empty or when unit
is not in use.
Setting the clock
1. Press HOUR/HR button to select the Hour. Press and hold HOUR/HR to toggle quickly.
2. Press MIN button to select the minutes. Press and hold MIN to toggle quickly.
3. When the correct time is displayed press SEL. The coffee maker will make an audible beep sound.
4. Re-set the clock: press Mode button six times until
!
CLEAN
ashes, press SEL button, the time will ash,
follow clock setting method.
Brew strength selection
1. Regular strength coffee (by default): press Mode button once,
!
CLEAN
will ash, press SEL button to conrm,
then press the START or
button
*
. The unit will beep and begin to brew regular coffee.
2. Gourmet strength coffee: press Mode button twice,
!
CLEAN
will ash, press SEL button to conrm, then
press the START or
button
*
. The unit will beep and begin to brew gourmet strength coffee.
3. Bold strength coffee: press Mode button three times,
!
CLEAN
will ash, press SEL button to conrm, then
press the START or
button
*
. The unit will beep and begin to brew Bold strength coffee.
4. 1-4 CUP Mode: press Mode button four times, 1-4
!
CLEAN
will ash, press SEL button to conrm, then press
the START or
button
*
. The unit will beep and begin to brew in 1-4 CUP Mode. The 1-4 Cup Mode is
ideally used for making 1-4 cups of coffee therefore 1-4 cups of water should be poured into the water
tank accordingly. If more than 1-4 cups of water are poured in, then everything poured in will brew.
*
Depending on the model number of your unit; for US CM4282-A, for Canada CM4282-CA.
Loading ...
Loading ...
Loading ...