Loading ...
Loading ...
Loading ...
10
7. To remove the vacuum/mulcher tube assembly, slide the
inlet cover lock button to unlock, then remove the tube
assembly from its housing (Fig. 10).
NOTE: It may be necessary to remove the blower tube or
vacuum/mulcher tubes to clear a blocked tube or impeller.
Make sure to turn o the unit and remove the battery
before attempting to clear any obstructions.
Battery Pack Operation
The equipment is powered by a lithium-ion battery. The battery
pack is completely closed and maintenance free.
Battery Charge Level Indicator
The battery pack is equipped with a push button for checking
the charge level. Simply press the push button to read o the
battery charge level from the LEDs of the battery indicator:
• All 3 level monitoring LEDs are lit: Battery charge level
is high.
• 2 level monitoring LEDs are lit: Battery charge level is
decreasing. Stop work as soon as possible.
• 1 level monitoring LED is lit: Battery is at. Stop work
IMMEDIATELY and charge the battery. Otherwise the
battery’s service life will be greatly shortened.
NOTE: If the charge level button does not appear to be
working, place the battery pack on the charger and charge as
needed.
Immediately after using the battery pack, the charge level
button may display a lower charge than it will if checked a few
minutes later. The battery cells “recover” some of their charge
after resting.
Charger Operation
mWARNING! Charge only iONMAX iBAT40XR PRO
SERIES lithium-ion battery packs in compatible iONMAX
iCHRG40 lithium-ion battery chargers. Other types of batteries
may cause personal injury and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger.
When to Charge the iONMAX iBAT40XR
PRO SERIES Lithium-Ion Battery
NOTE: The iONMAX iBAT40XR PRO SERIES lithium-ion
battery packs do not develop a "memory" when charged after
only a partial discharge. Therefore, it is not necessary to run
down the battery pack before placing it into the charger.
• Use the battery charge indicator lights to determine when
to charge your iONMAX iBAT40XR PRO SERIES lithium-ion
battery pack.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery
1. Slide the push lock button on the battery to release the
pack. Pull the battery up and out of the equipment.
(Fig. 11).
Fig. 10
Inlet cover
lock button
Charge level button
The battery is at 30% capacity
and requires charging
The battery is at 60% capacity
and requires charging soon
The battery is at full capacity
Light IndicatorsLights
Fig. 11
Push lock
button
Loading ...
Loading ...
Loading ...