Loading ...
Loading ...
Loading ...
36
vacuumed using a soft brush attachment.
Do not use harsh cleaners, scouring pads or solvents
to clean any part of the Fridge/Freezer.
CHANGING THE INTERNAL LIGHT
1. Before carrying out the LED replacement
always disconnect the mains supply.
2. Hold and lift up the LED light cover.
3. Remove the old LED by unscrewing it in an
anti-clockwise direction.
4. Replace with a new LED light by screwing it in a
clockwise direction marking sure that it is
secure in the light holder.
5. Refit the light cover and re-connect your
Fridge to the mains supply and switch on.
REVERSING THE DOOR SWING
Dissemble the Refrigerator Door
1. a．Use a tool to remove the screw off the
hinge cover, and then remove the latter. Insert
the communication line to the hole on the
cabinet top.
b． Use a tool to remove the 4 screws off the
upper hinge cover and then remove the latter.
Pry up the door bush and small end cap cover
on the door.
c． Insert the door bush and door
communication line into the hole on the door
and then put on the small end cap cover.
d． Use a tool to remove the 2 screws as
shows in the below figure to remove the hole
cover on the cabinet top and get the cabinet
communication line out of the hole.
Pry up the small end cap cover on the door
and get out the door bush and door
communication line.
e． Insert the door bush into the round hole
on the door and then put on the small end cap
cover.
f． Move the refrigerator door upward over
500mm to remove the door.
2. a． Use a tool to remove the 3 screws off
the middle hinge cover and then remove the
middle hinge.
b． move the freezer door upward over
500mm to remove the door.
c． Remove the adjustable front feet under
the lower hinge; use a tool to remove the 4
screws from the lower hinge and then
disassemble the lower hinge. Door disassembly
is finished.
Assemble door, lower hinge
accessories to the corresponding
positions
1. a． Use a tool to get the door bush out as
shown in the below figure and assemble it to
the corresponding position of the other side.
b． Use a tool to remove the screws off the
stopper ass as shown in the below figure and
then assemble them to the other side of the
door.
c． Use a tool to remove the axle and two
stoppers on the lower hinge and then
assemble them to the position as shown in the
below figure.
Assemble the refrigerator door and
freezer door to the opposite side
1. a． Remove the adjustable front foot as
shown below by hand and then assemble the
lower hinge to the other side of the cabinet
and fix the screws by using a tool.
b． Assemble the shorter adjustable front foot
to the lower hinge side and adjust the height
of the foot to make the refrigerator stay in
level.
2. Put on the freezer door and turn the middle
hinge by 180 °C and then assemble it to the
other side of the cabinet; use a tool to screw
up the 3 screws to fix the middle hinge.
3. Put on the refrigerator door and assemble
the upper hinge to the other side of the
cabinet; use a tool to screw up the 4 screws to
fix the upper hinge.
4. After that, connect the door
communication line and the cabinet
communication line and then put on the upper
hinge cover and fix it using a screw.
Assemble the hole cover to the other side of
the cabinet and use a tool to screw up the hole
cover.
Door disassembly is finished here.
Double check that the door is aligned correctly and
all the seals are closed on all sides. If necessary, re-
adjust the levelling feet.
NOTE: If you want to have the door swing reversed,
we recommend that your contact a qualified
technician. You should only try to reverse the door
yourself if you believe that you are qualified to do so.
All parts removed must be saved to do the
reinstallation of the door. You should rest the fridge
freezer on something solid so that it will not slip
during the door change process. Do not lay the fridge
freezer flat as this may damage the coolant system.
Ensure the fridge freezer is unplugged and empty.
We recommend that 2 people handle the fridge
freezer during assembly.
TROUBLE SHOOTING
If the appliance does not operate when switched on,
check.
Power cut: If the internal temperature of the
Fridge/Freezer compartment is -18°C or less when
the power returns, your food is safe. The food in your
Fridge/Freezer will remain frozen for approx 16
hours with the door closed. Do not open the
Fridge/Freezer door more than necessary.
The product is designed and built for domestic
household use only.
Loading ...
Loading ...
Loading ...