Loading ...
Loading ...
Loading ...
Positioning
o It is advisable that your appliance is only installed in a location where
the ambient temperature of the room, corresponds with the climate
classification that is stated on the rating plate of your appliance. Your
appliance may not function correctly if the ambient temperature falls
outside of the following ranges.
Climate classication Appropriate ambient temperature
SN 10 - 32 °C (50
ºF-90ºF)
N 16 - 32 °C (61
ºF-90ºF)
ST 16 - 38 °C (61
ºF-100ºF)
T 16 - 43 °C (61
ºF-109ºF)
o Positioning the appliance requires two people in order to avoid injuries or
damage to the appliance.
o Your appliance should not be located in direct sunlight or exposed to
continuous heat or extremes of temperature (e.g. next to a radiator or
boiler). If this is not feasible, then you should install an insulation plate
between the appliance and the adjacent heat source.
o You should check whether there is an electrical socket available, which
will be accessible after your appliance is installed.
o Place the appliance atly and rmly on a solid base.
o Anything positioned above the appliance must be at least 10 cm away
to allow sufcient cooling of the condenser. You must allow a 5 cm gap
to the rear and either side of the appliance.
o Be sure to leave enough space for the opening of the door, to avoid
damage to the appliance or personal injury.
Loading ...
Loading ...
Loading ...