Candy GVS H9A2DCE-80 Tumble Dryers

User Manual - Page 10

For GVS H9A2DCE-80.

PDF File Manual, 19 pages, Download pdf file

Loading ...
Loading ...
Loading ...
OPERATION
Do not open the door during the automatic
programs in order to obtain a proper drying.
5.
WATER CONTAINER
The water removed from the laundry during the
drying cycle is collected in a container inside
the door of the dryer. When the container is full
the indicator on the control panel will
light, and the container MUST be emptied.
However, we recommend that the container is
emptied after each drying cycle.
NOTE: Very little water will collect during the
first few cycles of a new machine as an internal
reservoir is filled first.
To Remove the Container
1. Gently pull out the
water container holding
the handle. (A)
When it is full the
water container will
weigh about 6 kg.
2. T i l t t h e w a t e r
container to empty the
water out through the
spout. (B)
When empty, replace
the water container
back as shown; (C) first
insert the base of the
container into position
as shown (1) then
gentle push the top into
position (2).
3. Press Button to
restart the cycle.
NOTE: If you have the
option of drainage near
to the dryer you can use
the discharge kit to
provide a permanent
drainage for the water
c o l l e c t e d i n t h e
container of the dryer.
This means that you
don't have to empty the
water container.
A
B
1
C
1. Open the door and load the drum with
laundry. Ensure that garments do not
hinder closure of the door.
2. Gently close the door pushing it slowly
until you hear the door 'click' shut.
3. Turn the Programme Selector dial to
select the required drying programme (see
Programme Guide).
4. Press the button. The dryer will start
automatically and the indicator above the
button will be continuously lit.
5. If the door is opened during the
programme to check the laundry, it is
necessary to press to recommence
drying after the door has been closed.
6. When the cycle is nearing completion
the machine will enter the cool down
phase, the clothes will be tumbled in cool
air allowing the load to cool down.
7. Following the completion of the cycle the
drum will rotate intermittently to minimize
creasing. This will continue until the
machine is switched OFF or the door is
opened.
10
Loading ...
Loading ...
Loading ...