Loading ...
Loading ...
Loading ...
10
PRECAUTIONS
• The blender must be operated on an even surface; otherwise, injury or accident may occur.
• Do not move the blender during operation; otherwise fire, electric shock, or injury may occur.
• Incorrect operation and improper use can damage the appliance and cause injury to the user.
• The appliance must be used for its intended purpose. No responsibility can be taken for any
possible damage caused by incorrect use or improper handling.
• Do not put the appliance or the plug into water or any other liquids. This could cause a fatal
electric shock. If the appliance or plug should accidentally become wet, unplug the appliance
immediately and have it checked by an electrician before using it again.
• Do not use the appliance with wet hands, on a damp floor, or when the motor itself is wet.
• Do not allow the cable to hang over sharp edges and keep it well away from hot objects and open
flames. Remove the plug from the socket only by holding the plug.
• For extra protection, it is possible to fit the electric household installation with a fault current
breaker with a rated breaking current of not more than 30mA. Ask your electrician for advice.
• Make sure that there is no danger that the cable or extension cable inadvertently be pulled or
cause anyone to trip when in use.
• If an extension cord is used, it must be suited to the power consumption of the appliance;
otherwise, overheating of the extension cord or plug may occur.
• Place the appliance on a firm, level, and heatproof surface away from open flames (e.g. gas oven)
and out of the reach of children.
• The glass containers are only to be used with the motor base.
• As long as the appliance is connected to the main socket, a small amount of current continues to
flow to the appliance even when it’s not in use.
• Never use the cable to carry the appliance.
• Children should be supervised to ensure that they do not play with the appliance.
RECOMMENDED USAGE TIME
The recommended usage time of the blender is 30 seconds operation, and 30 seconds rest.
• The automatic overheat protection feature may activate depending on the load and usage time of
the motor. If the motor feels warm and shuts off, please wait until the motor has cooled off
before resuming operation.
• Visit the Troubleshooting section of the manual for tips on how to avoid the automatic overheat
protection from activating.
Loading ...
Loading ...
Loading ...