Loading ...
Loading ...
Loading ...
4
Cold climate installation recommendation:
When installing this unit against a
Non-insulated exterior wall or chase, it is
mandatory that outer walls be insulated to
conform to applicable insulation codes.
ELECTRICAL CONNECTION
The unit comes standard with 6 feet (1.8M) three wire cord, exiting from the rear of the fireplace. Plan the
installation to avoid the use of an extension cord.
CLEANING TRIM
Clean the metal trim using a soft cloth, slightly dampened with citrus oil based product and buff with a clean
soft cloth. DO NOT use brass polish or household cleaners as these products will damage the metal trim.
Citrus oil based products can be obtained at supermarkets or hardware stores.
MAINTENANCE
The motors used on the fan and the flame generator assembly are pre-lubricated for extended bearing life
and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater unit is
recommended. Make sure the unit is turn OFF and unplugged whenever you are cleaning the heater of
fireplace.
ELECTRICAL SPECIFICATIONS
Voltage: 120VAC 60Hz
Watts: 1400 Watts
WARNING
: Make sure the power is turned off before proceeding.Any electrical repairs
or rewiring of this unit should be carried out by a licensed electrician in accordance with
national and locate codes. If repairing or replacing any electrical component or wiring,
the original wire routing, color coding and securing locations must be followed.
WARNING
: Electric outlet wiring must comply with local building codes and
other applicable regulations to reduce risk of fire, electric shock and injury to
persons.
WARNING
: Do not use this fireplace if any part of it has been under water.
Immediately call a qualified service technician to inspect the fireplace and replace
an
y
p
art of the electrical s
y
stem.
WARNING
: Disconnect power before attempting any maintenance or cleaning to
reduce the risk of fire, electrical shock or personal injury.
WARNING: During any service of this appliance, the power to the unit must be
turned off,
A
lwa
y
s remember to remove the electrical
p
lu
g
from the wall outlet.
Loading ...
Loading ...
Loading ...