Loading ...
Loading ...
Loading ...
SPECIFICATIONS
Dimensions 2.3 x 4.8 x 0.8 inches
(5.8 x 12.2 x 2.2 cm)
Weight 4.8 oz (136 g)
with mouthpiece and batteries
Sensor
Technology
Xtend™ electro-chemical fuel-cell
technology
Detection
Range
0.000 – 0.500 %BAC
Test Count Displays total number of tests
performed
Power Supply Two AA alkaline batteries, included
Battery Life Approximately 1500 tests
Warm Up Time 10-30 seconds, depending on last use
Response Time 3 seconds
Sensor
Accuracy
+/- 0.005 at 0.050 B.A.C
Operating
Temperature
32-104 °F (0-40 °C)
Blow Time: The default blow time is
5 seconds. This longer blowing time
generally provides a deep lung air
sample and a more accurate test result.
To adjust the blow time, press START.
Flow Detection Settings: Use this
option to adjust how hard a user is
required to blow. Press Start to change
the settings.
Standard level flow detection
This is the default setting for the unit.
This level requires a less forceful
breath by the user
Medium level flow detection
Press Start to change to the medium
level flow setting.
High level flow detection
Press Start to change to the high
level flow setting. This level requires
a more forceful breath by the user.
User activated test mode
Press Start again to change to the
USER activated test mode. When
testing in this mode the operator
must press Start during a breath
sample to activate the pump and
perform a test.
BAC
BAC
BAC
BAC
BAC
BAC
This device has been tested using NHTSA/DOT procedures. In this testing,
the accuracy of this device was established at Blood Alcohol Concentrations
(BAC) of 0.008 and 0.032, but not at greater concentrations. Additional
laboratory testing has been performed at concentrations ranging from
0.00 – 0.40% BAC.
10 11
Loading ...
Loading ...
Loading ...