Loading ...
Loading ...
Loading ...
6
CLEANING
ALWAYS unplug your slow cooker from the electrical outlet, and allow it to cool before cleaning.
CAUTION: Never immerse the heating base, power cord or plug in water or any other liquid.
Wash the glass lid and removable bowl with hot, soapy water. Do not use abrasive cleaning compounds or scouring pads.
A cloth, sponge, or rubber spatula will usually remove any food residue.
We recommend that you wash the removable cooking bowl by hand only, with a non-abrasive cleaning product and cloth, to
preserve the DuraCeramic
™
coating.
The outside of the heating base may be cleaned with a soft cloth and warm, soapy water. Wipe dry. Do not use abrasive
cleaners.
No other servicing should be performed.
NOTE: After cleaning by hand allow the cooking bowl to air dry before storing.
FITTING A PLUG (UK AND IRELAND ONLY)
This appliance must be earthed.
If the plug is not suitable for the socket outlets in your home, it can be removed
and replaced by a plug of the correct type.
If the fuse in a moulded plug needs to be changed, the fuse cover must be
refitted. The appliance must not be used without the fuse cover fitted.
If the plug is unsuitable, it should be dismantled and removed from the supply
cord and an appropriate plug fitted as detailed. If you remove the plug it
must not be connected to a 13 amp socket and the plug must be disposed of
immediately.
If the terminals in the plug are not marked or if you are unsure about the
installation of the plug please contact a qualified electrician.
AFTER SALES SERVICE
These appliances are built to the very highest of standards. There are no user serviceable parts. Follow these steps if the
unit fails to operate:
1. Check that the instructions have been followed correctly.
2. Check that the fuse has not blown.
3. Check that the mains supply is functional.
If the appliance will still not operate, return the appliance to the place it was purchased for a replacement. To return the
appliance to the Customer Service Department, follow the steps below:
1. Pack it carefully (preferably in the original carton). Ensure the unit is clean.
2. Enclose your name and address and quote the model number on all correspondence.
3. Give the reason why you are returning it.
4. If within the guarantee period, state when and where it was purchased and include proof of purchase (e.g. till receipt).
5. Send it to our Customer Service Department at the address below:
Customer Service Department
Jarden Consumer Solutions (Europe) Limited
Middleton Road, Royton, Oldham
OL2 5LN, UK.
Telephone: 0161 621 6900 Fax: 0161 626 0391
e-mail: [email protected]
Blue
(Neutral)
Brown
(Live)
Fuse
Green/Yellow
(Earth)
Plug should be ASTA approved to BS1363
Fuse should be ASTA approved to BS1362
Ensure that the outer sheath of
the cable is firmly held by the cord grip
3A
Loading ...
Loading ...