Loading ...
Loading ...
Loading ...
Operation Guide 5637
To specify standard time or daylight saving time (DST) for a city
1. In the World Time Mode, press D to display the city
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down A for at least two seconds.
x This toggles the city code you selected in step1
between Daylight Saving Time (DST indicator
displayed) and standard time (DST indicator not
displayed).
x Note that you cannot switch between standard time/
daylight saving time (DST) while UTC is selected as
the World Time City.
x The standard time/daylight saving time (DST) setting
affects only the currently displayed city. Other cities
are not affected.
DST indicator
E-39
To enter the World Time Mode
Use C to select the World Time Mode as shown on page E-11.
To view the time in another time zone
In the World Time Mode, press D to change the city code setting.
x Holding down D scrolls at high speed.
x To display the UTC city code (differential 0), press B and D at the same time.
E-38
Checking the Current Time in a Different Time Zone
You can use the World Time Mode to view the current
time in one of 31 time zones (48 cities) around the
globe. The city that is currently selected in the World
Time Mode is called the “World Time City”.
x The hour and minute hands indicate information for
the currently selected Home City.
x When you enter the World Time Mode, the currently
selected city code and city name (English) scroll once
across the digital display. After that, the city code
remains displayed.
x You can view the name (English) of your Home City
by pressing A.
World Time City hour and
minute
City code of World Time City
Second
E-37
To perform a countdown timer operation
D
D D D B
Start Stop (Resume) (Stop) Reset
Countdown in Progress
To stop the alarm
Press any button.
E-36
To configure the countdown timer
x If a countdown timer operation is in progress, press D
to pause it and then press B to reset the timer to its
start time.
x If a countdown timer operation is paused, press B to
reset the timer to its start time.
1. Hold down A until the flashing SET Hold indicator
disappears from the display and the minutes digits
start to flash. Release A after the digits start to flash.
2. Use D (+) and B (–) to change the minutes setting.
x Holding down either button scrolls at high speed.
3. After all the settings are the way you want, press A to
exit the setting screen.
E-35
Countdown Timer
The countdown timer can be set within a range of
one minute to 60minutes. An alarm sounds when the
countdown reaches zero.
To enter the Countdown Timer Mode
Use C to select the Countdown Timer Mode as shown
on page E-11.
Minutes Seconds
1/10 second
E-34
Note
x TGT flashes in the above operation even if the watch is in another mode.
To stop the alert beeper
Pressing any button while the alert beeper is sounding will stop it.
x Pressing D or B operates the elapsed time operation on page E-26.
To perform stopwatch timing without using the Target Time Alarm
Use step 7 under “To set a target time” to disable the target time alarm.
E-33
(3) Target time reached
x Beep for 10 seconds.
x Screen: Changes as shown in the figure.
x TGT becomes unlit.
(4) After target time is expired
x Screen: The top left indicator that indicates minutes flashes (at slow speed).
x Elapsed time is measured, with TGT remaining unlit.
x Resetting the elapsed stopwatch time automatically causes TGT to re-appear.
You can re-use the same target time, if you want.
E-32
(2) From target time half until target time is reached
x Screen: As shown in the figure, all of the part that
indicates minutes flashes.
x TGT flashes at high speed starting from one minute
before the target time.
E-31
x You can get an idea of time elapsed until the target time from changes in the
display.
(1) From start up to half of target time
x Screen: As shown in the figure, top left indicator that
indicates minutes flashes.
x TGT starts to flash.
E-30
Loading ...
Loading ...
Loading ...