Loading ...
Loading ...
Loading ...
5
11. Light Mode: Press this button to cycle through the available light modes:
• Color Cycle: The lights slowly glow and cycle through colors. Press and hold the
light mode button to freeze the lights on one color.
• Red/White/Blue: The lights all glow red for one second, followed by white then blue.
• Beat Sync: The lights react to the beat of the music.
• Off: The lights turn off. This is the default mode
when Wave Rider is first powered on.
12. Micro USB Port*: Use the included micro-USB cable to
connect this port to a computer or power adapter (DC 5
V; sold separately) to charge Wave Rider.
13. Auxiliary Input*: This stereo 3.5 mm (1/8”) input can be
used to connect a CD player, MP3 player, or other audio
source.
*IMPORTANT:
• Cover the Aux In and the micro-USB port with the cap in the locked position when using
Wave Rider in water.
• Make sure Wave Rider and its connections are dry before charging. Never charge when
wet.
Operation
Pairing or Disconnecting a Bluetooth Device
Note: Maximum range will be achieved when using devices with Bluetooth 4.0.
To pair a Bluetooth device:
1. Turn on your Bluetooth device.
2. Power on Wave Rider and it will automatically go into pairing mode to search for
Bluetooth devices. You will know you are in pairing mode when the Bluetooth LED is
slowly flashing.
3. Navigate to your Bluetooth device’s setup screen, find Wave Rider and connect.
Note: If your Bluetooth device prompts for a pairing code, enter 0000.
To disconnect a Bluetooth device:
1. Press and release the Bluetooth button to disconnect a paired Bluetooth device.
2. To connect to another Bluetooth device, repeat step 3 above.
12
13
Loading ...
Loading ...
Loading ...