Loading ...
Loading ...
Loading ...
7
9
Consumer SupportTroubleshooting TipsOperating InstructionsSafety Instructions
Installation
Instructions
About cycle options.
NOTE: Not all features are available on all dryer models. GEAppliances.com
Signal
Alerts you that the cycle is complete.
The clothes should be removed when the
beeper goes off so wrinkles don’t set in.
Press SIGNAL to select low or high volume,
or to turn the beeper off.
The beeper will continue to sound every
2 minutes (maximum of 4 times).
About cycle options.
NOTE: Not all features are available on all dryer models.
My Cycle
Set up your favorite combination of settings and save them here for one touch recall.
These custom settings can be set while a cycle is in progress.
To store a MY CYCLE combination of settings:
1. Select your drying cycle.
2. Change TEMP and DRY LEVEL settings to fit your needs.
3. Select any drying OPTIONS you want.
4. Press and hold the pad for three seconds to store your selection. A beep will sound
and the pad will light up.
To recall your stored MY CYCLE combination:
Press the MY CYCLE button before drying a load.
To change your stored MY CYCLE combination:
Follow steps 1–4 in “To store a MY CYCLE combination of settings”.
Add Water
When illuminated this indicates that your steam tank is low and it is time to add water to the tank. Please follow
the instructions on page 11.
8
My Cycle
To save a favorite cycle, set the desired
settings and hold down the MY CYCLE button
for 3 seconds. A beep will sound
to indicate the cycle has been saved.
To use your custom cycle, press the MY
CYCLE button before drying a load.
To change the saved cycle, set the desired
settings and hold down the MY CYCLE
button for 3 seconds.
See page 8 for more details.
Lock
You can lock the controls to prevent any
selections from being made. Or you can lock
the controls after you have started a cycle.
Children cannot accidentally start the dryer
by touching pads with this option selected.
To lock the dryer, press the LOCK button. To
unlock the dryer, press and hold the LOCK
button for 3 seconds.
When the lock function is enabled, the red
lock icon will appear in the upper display.
Even though the controls are locked,
the POWER button is still active
in case you have to turn the unit off.
Loading ...
Loading ...
Loading ...