Loading ...
Loading ...
Loading ...
11
SCRUB ZONE
Use the Scrub Zone option when you want to wash pots and pans, durable
serving bowls, and other large dirty hard to clean dishes. When using the Scrub
Zone option place the dishes face down directly above the Scrub Zone arm in
the back left corner of the lower rack.
HEATED DRY
When the Heated Dry option is selected, the heater will work during the drying
process.
SANITIZE
WARNING: Only sanitizing cycles have been designed to meet the
requirements of 6 for soil removal and sanitization efficacy. There is no
intention, either directly or indirectly, that all cycles on a certified
machine have passed the sanitization performance test.
The sanitize option sanitizes dishes and glassware in accordance with NSF
residential dishwashers are not intended for use in licensed food establishments.
When the Sanitize option is selected, the water temperature will reach 158°F
(70°C) maximum.
The Sanitized indicator light illuminates to indicate when the Wash cycle with
opened for 30 seconds.
NOTE: It is possible that the water will not reach 158°F (70°C) in the Sanitize
mode, if the temperature of the incoming hot water does not meet the minimum
requirement of 120°F (49°C).
HI TEMP WASH
When the Hi Temp option is selected, the water temperature will be maintained
at 140°F (60°C) maximum.
DELAY START
To delay the start of the selected cycle press DELAY START until the desired
delay time is shown in the LED display. The Delay option allows you to
automatically start the dishwasher with a 1 to 24 hour delay. To cancel the Delay
Start option and begin the cycle before the delay period is over press START/
CANCEL.
CHILD LOCK
You can lock all controls to avoid unintentionally changing the dishwasher cycle
or starting the dishwasher. The light next to Child Lock will illuminate to indicate
the Child Lock is activated and the Control panel is locked.
•
Press STEAM and SCRUB ZONE at the same time to either activate or cancel
the Child Lock option.
c LED DISPLAY WINDOW
Displays the Time Remaining in the selected Cycle, Delay Hours, and Error
Codes.
Time Remaining
Time remaining in a cycle will show hours and minutes alternately (1H-2H or
0-59).
Loading ...
Loading ...
Loading ...