Loading ...
Loading ...
Loading ...
5 6
INSTALLATION INSTRUCTION
Installation Methods
1. Open up the carton and take out the product, Instructions and the remote control, store
or dispose of the packaging materials carefully.
2. This product does not require assembly, it is ready to operate once all packaging
materials are removed. The handle in the rear housing should be used to lift and carry the
product, it can also be used to store the remote control when not in use. (See figure 1)
(Figure 1)
OPERATING INSTRUCTIONS:
Unwrap the cable and plug in the product, it will beep twice to signify that it is connected and
remain in standby mode, note that there are no LED indications in this mode.
1) Power Button - : You must always press this button to start the product, every time
you start the product it will always default to operate in Normal mode at Low speed with the
low speed LED and the power on LED both illuminated, no other function will operate unless
the relevant selection button is pressed (see following details). Pressing the power button
again during any mode of operation will return the product to standby mode.
2) Blower Mode Selection Button - : The default operating mode when you power on is
Normal air blower mode, there is no separate Normal blower mode operating LED. Pressing
when operating will change the blower operation modes from Normal to Natural mode,
Natural to Sleep mode and Sleep back to Normal mode, the relevant LED light will indicate
when Natural and Sleep mode is selected, only the selected fan speed LED will light in
Normal Blower mode.
Normal Blower mode: You can simply use the fan speed selection button to
manually select Low, Medium or High speed fan operation, the relevant speed indication
LED will light as you change between speeds in sequence.
Natural Blower mode In this mode the fan will automatically change speed to simulate
natural variances in the speed of the wind that you experience outside in natural windy
conditions. In this mode you can use the speed selection button to change between
Low/‘Light breeze’, Middle/‘Strong Breeze’ and High/‘Strong Wind’ modes. The specific
program waveform graph for each Natural wind mode is shown below:
Loading ...
Loading ...
Loading ...