Loading ...
Loading ...
Loading ...
Back-UPS Pro BX850/1000/1350/1500M/M-LM60
5
Front Panel Buttons and Display Interface
Use the three buttons on the front panel of the Back-UPS and the display interface to
configure the Back-UPS.
Front panel
Mute button
Power On/Off
button
Display button
Display interface
On Line: The Back-UPS is supplying conditioned AC power to connected
equipment
Load Capacity: The load is indicated by the number of sections illuminated,
one to five. Each bar represents 20% of the load.
Battery Charge: The battery charge level is indicated by the number of
sections illuminated. When all five blocks are illuminated, the Back-UPS is at
full charge. When one block is filled, the Back-UPS is near the end of its battery
capacity, the indicator will flash and the Back-UPS will beep continuously.
Overload: The power demand from the load has exceeded the capacity of the
Back-UPS.
Event: The event counter shows the number of events that occurred that caused
the Back-UPS to switch to on-battery operation.
Automatic Voltage Regulation: The Back-UPS can compensate for low input
voltage.
When illuminated, the Back-UPS is compensating for low input
voltage
In: Input voltage.
Out: Output voltage.
System Error Detected: The system has an error. The error number will
illuminate on the display interface. See “System Errors” on page 7.
Mute: If the line through the speaker icon is illuminated, the audible alarm has
been turned off.
bu109g
Loading ...
Loading ...
Loading ...