Loading ...
Loading ...
Loading ...
15
Maintenance
Troubleshooting
Service Schedule
PROBLEM. CAUSE SOLUTION
No power, vacuum
motor will not run
Is the cord plugged in? Plug in cord.
Circuit breaker tripped in building. Reset breaker.
Thermal protector tripped
Motor will restart after cooling down. To
prevent repeated tripping, clear all restric-
tions out of hose and tools, replace paper
filter bag. Clean cloth filter bag and
internal pleated filter, clear all restrictions to
the exhaust air flow.
Faulty switch. Call for service.
Faulty power cord. Call for service.
Poor vacuum
performance
Debris plugging hose, wand or accessory
tool.
Remove debris.
Paper bag full. Replace bag.
Cloth bag plugged.
Remove from machine, turn inside out and
shake or brush clean.
Hosecuffs loose or hose cracked. Tighten cuffs or replace hose.
Cap loose on top of machine. Tighten cap.
MAINTENANCE DAILY WEEKLY MONTHLY QUARTERLY
BI-
ANNUALLY
Check bag and replace if necessary *
Check hoses for wear, blockages, or
damage
*
Check major gaskets for leakage *
Check brush-should be clean with no
lint or strings attached
*
Wind cord and store in upright position *
Check hoses for cracks or holes *
Check all cords and handles for
damage or cracks; replace as
necessary
*
Inspect and replace all filters including
exhaust, intake, and microfilters
*
Check all gaskets for wear and
leakage
*
Check vac motor carbon brushes *
Check for arcing and pitting on any
electrical contacts; replace if found
*
Inspect and clean vac shoe; check for
dents and damage which would detri-
mentally effect vacuum and brush
movement
*
Check overall performance of machine *
Replace pleated dome filter *
86394670 - VacPac
Loading ...
Loading ...
Loading ...