Loading ...
Loading ...
Loading ...
3. If needed, use the extension wand to connect the power
cleaner and the utility brush attachment (Fig. 14).
Shutting Down
1. Release the trigger. Remove the battery.
2. Remove the siphon hose out from the bucket/fresh water
or turn o the water source.
3. Disconnect the siphon/garden hose connection on the
power cleaner.
Storage
mCAUTION! Always store your power cleaner in a
location where the temperature will not fall below 32ºF (0ºC).
The pump in this machine is susceptible to permanent damage
if it freezes. FREEZE DAMAGE IS NOT COVERED BY THE
WARRANTY.
• Store the power cleaner indoors in a dry, covered area
where it is not subject to adverse weather conditions.
• It is important to store this product in a frost-free area.
• Always empty water from all hoses, attachments and
pump, before storing.
Maintenance
m
CAUTION! Before working on the power cleaner,
remove the battery from the compartment.
1. To ensure good performance, check and clean the water
inlet lter on the end of the siphon hose. Remove and
disassemble the lter and rinse all components with warm
water to prevent any foreign matter from clogging the
pump (Figs. 15 – 16).
2. Clean the nozzle with the needle clean-out tool provided
(Fig. 17). Remove the spray wand from the gun; remove
any dirt from the nozzle hole and rinse.
Fig. 13
Feather bristle
utility brush
attachment
Fig. 14
Feather bristle utility
brush attachment
Extension wand
Fig. 15
Siphon hose
Fig. 16
Fig. 17
Needle clean-out tool
13
Loading ...
Loading ...
Loading ...