Loading ...
Loading ...
Loading ...
5
EN
B. Longer detachable power cords or extension cords are available and may be used
if care is exercised in their use.
C. If a long detachable power cord or an extension cord is used:
1) the marked electrical rating of the detachable power cord or extension cord should
be at least as great as the electrical rating of the appliance.
2) If the appliance is of the grounded type, the extension cord should be a grounding
type 3-wire cord.
3) the longer cord should be arranged so that it will not drape over the counter where
it can be pulled on by children or tripped over accidentally. The appliance may
have a polarized plug (one blade is wider than the other). To reduce the risk of
electric shock, this plug is intended to fit into a polarized outlet only one way. If
the plug does not fit fully into the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to modify the plug in anyway.
KRUPS reserves the right to modify the characteristics or components at any time in
the interests of the consumer.
CAUTION: the safety precautions are part of the appliance. Read them carefully before using your
new appliance for the first time. Keep them in a place where you can find and refer to them later
on.
BEFORE USING FOR THE FIRST TIME
■
Remove all of the various packaging, stickers or accessories from both the inside and outside of the kettle.
■
Adjust the length of the cord by unwinding it under the base. Wedge the cord into the notch. (fig. 1)
■
Throw away the water from the first two/three uses as it may contain dust. Rinse the kettle and the filter separately.
USE
1. TO OPEN THE LID.
■
Lid opens automatically: press the button at the top of the handle. (fig. 2)
■
Do not use your kettle without its lid. In case the lid is lost or broken, please contact your after-sales service
center.
2. PLACE THE BASE ON A FLAT, STABLE, HEAT-RESISTANT SURFACE AWAY FROM WATER
SPLASHES AND ANY SOURCES OF HEAT.
■
Kettle is only to be used with the base provided.
3. FILL THE KETTLE WITH THE DESIRED AMOUNT OF WATER. (fig. 3)
■
Never fill the kettle when it is on its base.
■
Do not fill it above the maximum level, or below the minimum level. If the kettle is too full, boiling water may spill
out. (fig. 4)
■
Do not use without water.
■
Check that the lid is closed properly before use. (fig. 5)
4. POSITION THE KETTLE ON ITS BASE. PLUG IT INTO THE WALL SOCKET.
5. TO START THE KETTLE.
■
Press the on/off button at the bottom of the handle. The on/off button will light up. (fig. 6)
6. AS SOON AS THE WATER REACHES BOILING POINT, THE KETTLE WILL TURN OFF
AUTOMATICALLY.
■
The light will turn off when the on/off switch returns to the upper position after boiling.
■
You can stop it manually, before removing it from its base to pour the water. Adjust the on/off button (located at
the bottom of the handle) upwards. The light will turn off. (fig. 7)
■
Make sure that the on/off button is in the off position after boiling and that the kettle has switched off before
removing it from its base.
■
Do not leave water in the kettle after use as this quickens the formation of scale.
KR_BOUILLOIRE_PERFORMA_NAFTA_NC00123439_Mise en page 1 18/04/14 10:14 Page5
Loading ...
Loading ...
Loading ...