1. Ma 2. For a look at the various buttons on your speaker, view the graphic below.ke sure the following items are
included in your package.
AC Adapter
AUX Cable
Item # IMW888
Quick Start Guide
RUGGED BLUETOOTH SPEAKER
Charging: When charging, an red LED light will illuminate. The red light will
turn o when your unit is fully charged.
or
Power on your speaker. Go to the
Bluetooth Manager of your Bluetooth
device. Search Bluetooth devices and
select “SUPER LIFE JACKET” to start
connecting.
5. Pair the Speaker Using NFC
With Near Field Communication (NFC), you can
easily pair and connect your speaker to your
compatible device. Just hold your NFC enabled
device directly against the wireless check in spot on
your speaker.
Power On ...........................................
Play / Pause........................................Press
Volume Up / Down..............................Press + or -
Disconnect Device....Press
Battery Status.....................................Press and +
Voice Control......................................Press 2 Times
Answer / End Call............................... Press
Stereo Plus Pairing............................Hold for 2 Seconds
Next Track..........................................Hold +
Previous Track....................................Hold -
Press
Power O............................................Hold for 2 Seconds
Pairing Mode /
3. Connect the included AC Adapter to the DC In port on your speaker in order to
charge your speaker’s internal battery. A full charge takes approximately 4 hours.
* Pairing mode times out in 10 minutes.
4. Pairing Your Speaker with a Bluetooth Device
-Pairing the Super Life Jacket Speaker with a
Bluetooth Device for the First Time
When you power on your Super Life Jacket speaker for the
first time, it will automatically go into pairing mode. The LED
status light will flash rapidly as your speaker searches
for a Bluetooth audio source to pair with.
Once you have successfully paired your speaker with a
Bluetooth audio source, the LED status light will stop flashing
rapidly, and begin shining steadily while remaining blue. In
addition, your speaker will emit an audible tone to confirm
that pairing was successful.
-Pairing Additional Bluetooth Devices to the Super Life Jacket Speaker
By pressing the Bluetooth Button ( ) your speaker will again go into pairing mode. The
LED status light will flash rapidly, as your speaker searches for another Bluetooth
audio source to pair with.
6.By downloading the “ALTEC CONNECT” app (for iOS and Android)
8.You can also use the included 3.5mm Auxiliary Cable to
connect audio devices through the AUX In port on your speaker
7.Using the Stereo Plus Pairing Feature
The Stereo Plus Pairing feature allows you to connect two Super Life Jacket speakers together
for a bigger, more powerful sound.
The Stereo Plus Pairing feature can be accessed through the Altec Connect app, but you can also
use it without the app. To do so, follow the steps below:
1. Have one Super Life Jacket speaker turned on, paired and playing music.
2. Power on your second Super Life Jacket speaker.
3. Press and hold the Bluetooth buttons on both speakers at the same time for two seconds.
The two connected speakers will now play the same music from the same device.
you can personalize your SUPER LIFE JACKET speaker.
ALTEC CONNECT will allow you to:
-Enable the Stereo Plus Pairing setting
-Control Play/Pause/Skip/Volume/Mute
-Get over the air software updates for your Super Life Jacket speaker
-Select EQ sound settings
SUPER LIFE JACKET
Indicator
USB OUT 5 V
AUX IN
DC IN
2
USB OU T 5V
AUX IN
DC IN
USB OUT 5V
AUX IN
DC IN
Loading ...
