Loading ...
Loading ...
Loading ...
13
OFF/0
ON/I
OFF/0
ON/I
oPerating inStrUctionS
*!Turn on the water supply at the faucet.!* (Fig. 19)
Powering Up
• Make sure the “ON/OFF” switch is in the “OFF” position. The power switch has international
symbols for ‘on’ and ‘off’: On (|) Off (O), (Fig. 20).
• Unwind the power cord completely and plug the GFCI into a grounded 120 volt outlet. Press the
‘reset’ button on the GFCI box (Fig. 21). The indicator window should show a red color. This must
be done each time the unit is plugged in.
• Release the safety push trigger lock up and back into trigger. (Fig. 22). While pointing the spray
gun in a safe direction, squeeze the trigger on the spray gun until there is a steady stream of
water, letting the water and air out of the hose. Push trigger lock back down to lock back into
place.
• Turn the power switch to the ‘ON’ (|) position. The unit will turn on for 1 - 2 seconds and shut off,
this is a normal function of the (TSS) auto start feature. Squeeze the spray gun trigger to begin
pressure washing.
• Squeezing rapidly will cause the (TSS) feature to miss an on/off cycle that may prevent from
turning on while squeezing trigger after rapid squeezing. Use slow deliberate trigger pulls to
avoid such symptoms.
Fig. 20
Fig. 19
Fig. 21
Fig. 22
Unlock
Lock
Loading ...
Loading ...
Loading ...