Loading ...
Loading ...
Loading ...
Page 14
To switch on a heater it is necessary to
actuate every cooking zone by means of two
operations:
Select a heater
Select the desired cookset
Selecting a power level for a heater
A heater is selected by touching the heater
[HEATER_n_KEY] key for 160 ms, a beep
sounds and the heater display shows the
power level.
The heaters that are not selected are shown
with a dot point.
Selecting a heater
Heater selection
The [HEATER_n_KEY] key will be locked
to select a heater:
x If the cooktop is off (all the heater
displays off), or
x if the key lock is activated , or
x if there is any heater or appliance error.
The heater selection will finish:
x 10 second after the last touch over the
[SLIDER] key
x if another heater is selected
x or if the [HEATER_n_KEY] key is
touched for 160 ms.
When the heater selection is finished after
10 seconds, a beep sounds and all the
heater displays show the power levels again.
Loading ...
Loading ...
Loading ...