Bose VIRTUALLY INVISIBLE 791 II Virtually Invisible 791 in-ceiling speakers II

User Manual - Page 4

For VIRTUALLY INVISIBLE 791 II.

PDF File Manual, 8 pages, Read Online | Download pdf file

VIRTUALLY INVISIBLE 791 II photo
Loading ...
Loading ...
Loading ...
4 - English
About your Virtually Invisible
®
791
series II or 591 in-ceiling speakers
The Bose
®
Virtually Invisible
®
791 series II or 591 in-ceiling
speakers provide s uperior performance for built-in stereo
music listening and home theater enjoyment.
Unpacking
Carefully unpack the carton and confirm that the following
parts are included:
Virtually Invisible
®
791
series II speakers
Virtually Invisible
®
591
speakers
Two speakers Two speakers
Two speaker grilles Two speaker grilles
Template Template
Note: If part of the system is damaged, do not use it. Contact
your authorized Bose
®
dealer or Bose customer service.
Refer to the contact sheet in the carton.
Recommended tools
You may need the following tools to complete installation:
Phillips-head screwdriver Cutting tool
Power drill Safety goggles
Speaker wire requirements
Gauge Maximum Length
18 AWG (0.82 mm
2
) 20 ft. (6 m)
16 AWG (1.3 mm
2
) 30 ft. (9 m)
14 AWG (2.1 mm
2
) 50 ft. (15 m)
12 AWG (3.3 mm
2
) 90 ft. (27 m)
Allow enough wire from the ceiling to wire the speakers
before installing.
Strip ½ in. (13 mm) of insulation at each end of both wires.
Please check your local building codes and use only the
correct type of wire required for in-ceiling installation.
For information on installing speaker wire, consult a
professional electrician or audio/video installer.
Placement guidelines
For optimal stereo performance, install the speakers in
positions similar to the diagram below at a minimum of the
suggested distances:
Notes:
Use a stud finder to ensure the speaker hole is at least 4¾
in. (12 cm) away from a joist.
Mount these speakers in wood frame or similar construction
only. Bose recommends installing these speakers only in
wood frame or similar construction with adequately spaced
studs, as found in 2 x 6 construction.
Placement in unfinished construction
If you are planning installation in unfinished construction,
purchase the Bose rough in kit. See “Accessories” on page
7.
Introduction
> 6 ft. (2 m)
> 2 ft.
(.6 m)
> 3 ft.
(1 m)
> 3 ft.
(1 m)
> 2 ft.
(.6 m)
> 2 ft.
(.6 m)
> 2 ft.
(.6 m)
Loading ...
Loading ...
Loading ...