Loading ...
Loading ...
Loading ...
4
ADDITIONAL ACCESSORIES
Bun Warmer
Raise the bun warmer by pressing the handle on the corresponding bun warmer
function (Fig. 7).
Position the rolls on the shelves and press on the lowering lever until it locks
automatically. Do not go beyond position 2. Start the appliance (Fig. 8).
Ensure the rewarming function is working properly, make sure the bun warmer is in the
right position. Also do not put more than 2 buns on the warmer at one time (Fig. 9). Do
not put any pastries directly on the toaster to reheat them. Use the bun warmer instead.
To improve the results, turn the rolls over and repeat the toasting operation.
After use, lower the bun warmer by raising the handle on the bun warmer feature.
The bun warmer should not be used for longer than 10 minutes.
Defrost feature
The toaster has a pre-programmed defrosting feature. Toasting frozen bread takes
longer than toasting bread which is not frozen.
Insert one or two frozen slices of bread or toast in the toaster (Fig. 10).
Select the desired toasting level and lower the handle (please see the “OPERATING
MODE” paragraph).
Press the “ ” button (Fig. 10).
The “DEFROST” and “STOP” buttons will illuminate.
Reheat feature
The toaster has a pre-programmed feature to reheat pieces of bread or toast without
toasting them too much.
When rst using, try out the toasting setting, as the result depends upon the type of
bread and the degree of moisture.
Generally speaking, a higher temperature is required for breads other than white.
Turn the toasting grade selector to a lower number if, for example, only one slice of
bread is being toasted.
Caution:
Relatively dry slices of bread, or bread that has already been toasted once, will brown
much more quickly and may under certain circumstances catch fire. Therefore set
the heat control to a lower setting and do not leave the toaster unattended.
Fully depress the lowering lever, which will then lock into position (Fig. 4).
The appliance will begin to operate and the STOP button will illuminate. The handle
will only lock if the toaster is plugged in.
After completion of the toasting operation, the toast will automatically be raised and
the appliance will switch itself off (Fig. 5).
Remove the bread. To make it easier to remove the bread you can lift the lowering
lever as far as it will go.
To stop the toaster when toasting is underway, press the “stop” button (Fig. 6).
Note:
Should a slice of bread become trapped in the toasting well, unplug the power
cord, let the appliance cool down and then carefully free the toast without touching
the heating elements.
Loading ...
Loading ...
Loading ...