Loading ...
Loading ...
Loading ...
CAUTION: Do not at any time let brake fluids, gasoline,
petroleum based products, penetrating oils, etc., come in
contact with plastic parts. They contain chemicals that can
damage, weaken or destroy plastic.
Make sure the battery is detached from the unit, then use
only mild soap and a damp cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the
tool into a liquid.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the
tool on or adjacent to fertilizers or chemicals.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by
a qualified individual using only identical replacement parts.
If you drop the trimmer, carefully inspect it for damage. If the
guard is bent or cracked, handles broken or if you see any
other condition that may affect the trimmer’s operation, it must
be repaired before putting it back into use. Call our customer
service help line at 1-800-618-7474 for assistance.
MAINTENANCE
9
Model LST01562S
TROUBLESHOOTING
Call us first with questions about operating or maintaining your product
at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern Standard Time,
or get assistance on scotts.americanlawnmower.com.
CALL US FIRST !!
Problem Possible Couse Possible Solution
-Unit does not Run -Battery not making contact -Check battery is fully inserted
-Tripper switch not operational -Check that lock off button is fully forward prior to moving trigger
-Battery not installed properly -Check battery installation
-Battery not charged -Check battery charging requirements
-Line won't feed
-Line tangled in spool
-Unwrap 24" of line and re-wind
-Line fails to cut off
-Line cutter in guard is damaged or missing
-Replace guard
-Battery will not charge
-Battery not inserted into charger
-Insert battery into charger until red LED appears
-Charger not plugged in -Plug charger into a working outlet
-Check current at receptacle by plugging in a lamp or other appliance
-Check to see if receptacle is connected to a light switch which turns
power off when you turn out the lights
-Surrounding air temperature too hot or too cold -Move charger and tool to a surrounding air temperature of about 39
degree F (4 degree C) or below 104 degree F (40 degree C)
Loading ...
Loading ...
Loading ...