Loading ...
Loading ...
Loading ...
3
4
RJ11-17-V3 RJ11-17-V3
BEFORE FIRST USE
1. Remove all packing materials from the inside and outside of kettle.
2. Rinse the inside with water. Warning: Never immerse the kettle, its base, the cord or the
plug in water or any other liquids. The electrical connections and the on/off switch must
never come into contact with water or any other liquids.
3. Wipe down exterior with a damp cloth or paper towel.
4. Dry completely.
HOW TO USE
1. Place the base on a flat, sturdy surface away from any sources of water or heat. Ensure that
the cord is positioned in the cord holder. Plug cord into outlet.
2. Remove kettle from base if attached. Push lid release button to open lid.
3. Fill with desired amount of water. Do not exceed the MAX fill line (1.7L), and do not fill
below the MIN fill line (0.8L)
NOTE: Only use the kettle to heat water.
4. Push lid down to close and snap into place.
5. Place the kettle onto the base.
6. Press the on/off switch to turn the kettle on. Once the water comes to a boil, the kettle and
on/off indicator light will automatically turn off.
CAUTION: The kettle and water inside will be very hot. Handle with care. If choosing to
open the lid when there is hot water water inside, do so carefully. Hot steam may escape.
7. Use the handle to lift the kettle off the base. Carefully pour into desired vessel, i.e. cup,
bowl, etc.
8. Return kettle to base. Press on/off switch at any time to reheat water.
BOIL-DRY PROTECTION
If the kettle starts to heat without enough water, it will automatically turn off to avoid any po-
tential damage.
OPERATING INSTRUCTIONSFEATURES
1. Pour Spout
2. Hinged Lid
3. Cool-Touch Lid Surface
4. Lid Release Button
5. Cool-Touch Handle
6. Measurement Markings (MAX: 1.7L, MIN: .8L)
7. On/Off Switch
8. Heating Element
9. 360° Swivel Base
10. Cord/Plug
11. Cord Holder
12. Cord Wrap Storage (Located underneath the base.)
1 2 3 4
5
6
7
8
9
10
12 11
Loading ...
Loading ...
Loading ...