Instruction Manual
Ice Maker
Don’t forget to register your product at www.euhomy.com/register
for updates, warranty, and other relevant information.
Dear Customer,So lucky to meet you guys !!!
Thanks for making a purchase on Euhomy!
We hope to provide you with sincere service. If there is anything missing or wrong with your order，
If you have any question about using our Ice Maker. PLEASE reach out to us.
Email-([email protected]) or Facebook-(@Euhomy).
Euhomy team will answer your doubts online for 24 hours. Your satisfaction is our ultimate goal.
We' d appreciate if you could share your experience with other shoppers on Amazon. We' d love to
make it right for you! If you just want to see the problem description, you can directly see the tenth
page, Or contact us directly. Email:[email protected]
Our Mission:To be the most trusted appliance brand, Creat compact and practical appliance to better
your life.
Congratulations
Q&A
1.How often do I need to clean my ice maker?
Depending on your usage habits, if you use it frequently, it is recommended that you clean it at least once
a week. Failure to clean the machine will cause scale accumulation, which will eventually block the pump
and cause the product to fail to work.
2.How should I clean the machine?
It is recommended to use lemon water or weak acid vinegar for cleaning. Drain immediately after cleaning,
and then clean it with pure water.
It is recommended to drain water at least once every three days. Draining can not only ensure that the
hardness of the water is not too high, but also ensure that impurities can be discharged well, and it is not
easy to produce scale in the water tank.
3.Why is my ice cube cloudy?
It means that your water quality is turbid. It is recommended to use drinking water and distilled water. If
your water quality problem is serious, it is recommended that you install a water filter kit.
4.Can I put milk and juice into the water tank to make ice cubes?
It is recommended that you do not do that. Our research has found that the high concentration of milk and
beverages can easily block the pump and reduce the life of the pump. At the same time, the protein in milk
is prone to calcification, which chemically reacts with the PU water pipe inside the machine, which easily
breaks it, making the product unable to continue working.
5.Why does my ice cube melt easily?
Because the ice maker is not a refrigerator, it does not have a heat preservation function. The high
ambient temperature in summer will accelerate the melting of ice cubes. You can close the lid of the
machine to keep the internal temperature. Some customers also put electric fans on the side of the
machine to blow away the hot air around, thus solving the problem, you can try. However, if you are not
using ice cubes for a long time, we recommend removing them from the ice basket and storing them in the
refrigerator.
6.Why is my ice cube so thick and what should I do?
It may be that your ice making time is set too long, or it may be that the temperature of your environment is
low. You can try to adjust the size of the ice cubes.
7.Why does the ice cube I made have a plastic smell?
The ice cube itself has no taste. If you feel there is a plastic smell, try to clean the inside of the machine
with lemon water, then run a few cycles, and finally rinse with distilled water.
8.Why is there noise in the operation of my machine?
There is a faint sound when the machine is running. Closing the lid can reduce the noise. If the water
pump makes noise during use, it is recommended to turn off the machine first, and then turn on the
machine after cleaning the filter in the water tank to observe whether the noise disappears.
9.Why is water leaking from my machine?
It may be that the PUA tube inside the machine fell off during transportation. You can remove the back
cover of the machine and connect it by yourself. If you don't know how to operate, please contact the
Euhomy team. We will give you a professional video to help you solve the problem.
10.Why is there water flowing but not making ice?
If you make sure that the ambient temperature is not abnormal, then the refrigerant of the machine has
leaked. Please provide a video or picture and send it to us, and the Euhomy team will help you.
Contents
1
Safety precautions 2-4
Operation & Installation 5-7
Maintenance & Tips 8
10
Warranty
9
Safety Precautions
2
Do not use this appliance near water.
Clean only with a damp cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding type plug has two blades and a third grounding
prong. The wide blade or the third prong are provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the appliance.
Do not attempt to modify or extend the power cord of this appliance.
Unplug this appliance during lightning storms or when it will not be used for long periods of time.
Unplug this appliance before cleaning it.
Make sure that the available AC power matches the voltage requirements of this appliance.
Do not handle the plug with wet hands. This could result in an electric shock.
Unplug the power cord by holding the plug, never by pulling the cord.
Do not turn the appliance on or off by plugging or unplugging the power cord.
Turn off the appliance before unplugging it.
Refer all servicing to qualified service personnel. Servicing is required when the appliance has been
damaged in any way, such as the power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the appliance, the appliance has been exposed to rain or moisture, does not
operate normally, or has been dropped.
To reduce the risk of fire or electric shock, do not expose this appliance to rain, moisture, dripping, or
splashing, and no objects filled with liquids should be placed on top of it.
This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety.
Do not use your ice maker outdoors. Place the ice maker away from direct sunlight and make sure
that there is at least four inches of space between the back of your unit and wall. Keep a minimum
distance of four inches on each side of your unit free.
Do not use liquids other than water to make ice-cubes.
Do not clean your ice maker with flammable fluids. The fumes can create a fire hazard or explosion.
Do not tip over.
When using electrical appliances, basic safety precautions
should always be followed:
SAVE THESE INSTRUCTIONS / For Household Use Only
3
Safety Precautions
Fill with potable water only. Only use drinking water.
Do not touch the evaporator when the ice maker is making ice, it may burn your skin.
This appliance must be earthed.
Do Not Use Mechanical Devices To Defrost Ice Maker. Do Not Puncture Refrigerant Tubing.
To Be Repaired Only By Trained Service Personnel. Do Not Puncture Refrigerant Tubing.
Consult Repair Manual/Owner’s GuideBefore Attempting To Install or Service This Product.
All Safety Precautions Must be Followed.
Dispose Of Property In Accordance With Federal Or Local Regulations.
Follow Handling Instructions Carefully.
The ice maker should be installed in accordance with the safety standard for Refrigeration
Systems, ASHRAE15. The ice maker shall not be installed in corridors or hallways of public
buildings.
If the unit is with problem need to be maintained, that replacing with like components and that
servicing shall be done by factory authorized service personnel, so as to minimize the risk of
possible ignition due to incorrect parts or improper service.
This appliance must be plugged into at least a 15 A, 110 - 115 V, 60 Hz GROUNDED
OUTLET. This appliance must be grounded. It is equipped with a 3-wire cord grounding plug.
The plug must be plugged into an outlet that is properly installed and grounded.
Note:
Failure to follow these instructions can result in electric shock, fire, or death.
Keep ventilation openings in the ice maker clear of obstruction.
Do not damage the refrigerant tubing when handling, moving,or using the ice maker.
Never allow children to play with or operate the ice maker.
Unplug the ice maker before carrying out user maintenance on it.
Risk Of Fire or Explosion- Flammable Refrigerant Used
Electric Shock Hazard
4
If a component part is damaged, it must be replaced by the manufacturer, itsservice agent, or similar
qualified persons in order to avoid a hazard.
Follow local regulations regarding disposal of the ice maker due to flammable refrigerant and gas. All
refrigeration products contain refrigerants, which under the guidelines of federal law must be removed
before disposal. It is the consumer's responsibility to comply with federal and local regulations when
disposing of this product.
This ice maker is intended to be used in household and similar environments.
We do not recommend the use of an extension cord with this appliance. If you must use an extension
cord, us one with a minumum of 14 AWG wiring and rated at no less than 1875 Watts.
Safety Precautions
Avoid the use of an extension cord because it may overheat and cause a risk of fire. However, if it is
necessary to use an extension cord:
Use only 3-wire extension cords with 3-blade grounding plug.
The marked rating of an extension cord must be be equal to or greater than the rating of this
appliance.
It should be positioned such that it does not drape over the counter or tabletop where it can be pulled
on by children.
Operation & Installation
5
Control panel
Water drain cap
(located at front bottom
of the ice maker)
Air vent
Top cover with
transparent
window
Ice scoop
Ice full
sensor
Ice
basket
Maximum
water level
(under ice
basket)
water
shortage
indicator
Ice full
indicator
Ice size
indicators
Select ice
cube size
Power
button
ASSEMBLY AND PARTS
Operation & Installation
6
This portable ice maker uses a fully-automatic control system, with an advanced microcomputer for
easy and convenient ice making. Making ice is simple and fast. Just add water, plug into an outlet, and
press the ON/OFF button. You can select one of the two ice cube sizes with the touch of a button.
When first turning on the unit or during ice-making cycles, the compressor will stay idle for 3 minutes,
while energizing.
There are warning indicators that alert you to fill water when the reservoir is empty, and to remove ice
when the storage basket is full. The icemaker also has built-in safeguards that can limit accidental
damage, automatically shutting down the system when necessary.
The incline angle of the ice maker cabinet should not exceed 45˚ during transportation or use. Do not
turn the icemaker upside down. Inverting the ice maker could cause the compressor or refrigerating
system to operate incorrectly. When the ice maker is moved or transported, please allow time for the
fluids in the compressor to settle. Before using the ice maker for the first time, please wait 2 hours
after the unit has been leveled and positioned in its proper place.
Please ensure the ice maker is level and on a stable table or platform to avoid malfunction.
The machine must be placed on a dry and level surface with sufficient ventilation, far from heat
sources such as ovens, heaters and corrosive gases. Leave an 8" (20 cm) clearance on all sides of
the ice maker for proper ventilation.
Do not fill the water reservoir with hot water. This may damage the ice maker. It is best to fill the
water reservoir with water of room temperature or lower.Please ensure the ice maker is level and on
a stable table or platform to avoid malfunction.
BEFORE FIRST USE
PREPARING YOUR ICE MAKER
Remove the exterior and interior packaging.
Make sure that the ice basket and ice scoop are inside. If any parts are missing, please contact
customer service.
Remove the tape holding the ice scoop and ice basket.
Clean the tank and ice basket with diluted detergent, warm water, and a soft cloth.
Allow one hour for the refrigerant fluid to settle, then plug the ice maker in to a grounded wall outlet.
Prior to using your ice maker each time, wipe out the interior with a clean,damp cloth.
Making Ice Ensure that the drain plug underneath the front of the unit is closed and the water tube
screen is in place.
Plug the ice maker into the wall outlet and the green power indicator light.
Open the cover and remove the ice basket.
Fill the water reservoir. NOTE: do not fill above the max water level mark at the back of the
water reservoir.
Replace the ice basket and close the cover.
Press the ON/OFF button and the green POWER LED will light signifying that the unit is on.To
change between either the small or large ice size, press the SELECT button until the desired ice size
is indicated.
USE YOUR ICE MAKER
Note:
Operation & Installation
7
The ice making cycle will last approximately 8-13 minutes depending on the ice size that is selected.
The ice making cycle starts with water being pumped into the Water Tray situated below the
Evaporator Fingers. Over the next 8-13 minutes ice forms on the Evaporator Fingers. Once this has
completed, the Ice Tray will tilt backwards and the remaining water in the Ice Tray is drained back
into the Water Reservoir. The ice cubes are then dropped from the Evaporator Fingers and pushed
forward into the Ice Basket by the Ice Shovel. The Ice Tray will automatically move back into position
under the Evaporator Fingers and start the next cycle.
The ICE FULL LED light will light up when the ice basket is full and the Ice Maker will stop the ice
making cycle automatically. Gently remove the ice from the Ice Basket with the Ice Scoop. Once the
Ice Basket has been emptied and the Cover closed, the Ice Maker will restart its ice making function
automatically.
The ADD WATER LED light will light up when there is no more water in the Water Reservoir, and the
ice making cycle will stop automatically. Press the Power Button once (the Power Button will flash
every 5 seconds), remove the ice basket, and add water to the Water Reservoir.
If the room temperature is below 60° F (15.6° C), select the SMALL ice cube size to
prevent the ice cubes from sticking together
Press and hold the SELECT button for five seconds to run 8 continuous cycles, even when the
ICE FULL indicator is on.
Do not fill above the MAX water level mark at the back of the Water Reservoir. Replace
the ice basket, and close the Cover.
Direct sunlight or reflected sunlight may cause the infrared sensor to malfunction. If the unit does not
stop making ice cubes even when full, move the ice maker to a darker location.
You must change the water in the tank at least every 24 hours to ensure a reasonable hygene level
and avoid bad smelling ice.
Wait 3 minutes then press the Power Button to restart the ice making function.
When you have finished making ice, transfer the ice to a freezer.
The ice will last in the Ice Maker for up to a 18 hour period, depending on the ambiant temperature.
Stop the ice making cycle by pressing the Power Button. Unplug the unit from the wall outlet.
Open the Cover and allow the Ice Maker to reach room temperature and follow the directions in the
Care and Cleaning section.
Maintenance & Tips
8
Your ice maker is designed for year-round use with only minimal cleaning and maintenance.
When you first receive it, wipe the outside with a mild detergent and warm water, then wipe dry with
a dry cloth. Do this periodically to keep your ice maker looking new.
To prevent damage to the finish, do not use:
Gasoline, benzine, thinner, or other similar solvents.
Abrasive cleaners.
MAINTENANCE
TIPS & SUGGESTIONS
Stop the ice-making cycle by pressing the POWER button. the green LED light will go out, indicating
the ice maker is off. Unplug the Ice Maker from the wall outlet and allow the unit to warm up to room
temperature.
If the Water Tray is not in the vertical position behind the Evaporator Fingers, gently push the Water
Tray back so that all water drains into the Water Reservoir.
Open the Drain Plug to drain out excess water.
Remove the Ice Basket.
Remove the Water Tube Screen and rinse under running water.
Clean the Ice Maker interior with a soft cloth dampened in warm water and vinegar.Rinse with a
clean, damp cloth.
Replace the Drain Plug and the Water Tube Screen. Wash the Ice Basket and Ice Scoop in warm
soapy water. Rinse and dry.
Clean the exterior of the Ice Maker with a soft, damp cloth. Use a mild dishwashing soap if neces-
sary.
Do not clean the Evaporator Fingers.
Locate your ice maker in the coolest area of the room, away from heat producing appliances or
heating ducts and out of the direct sunlight.
Make sure that the appliance is sufficiently ventilated, with adequate air circulation behind it.
Note:
Warranty
9
Euhomy offers a limited 1-year warranty (“ warranty period” ) on all of our products purchased new and
unused from Euhomy company, with an original proof of purchase and where a defect has arisen, wholly
or substantially, as a result of faulty manufacture, parts or workmanship during the warranty period. The
warranty does not apply where damage is caused by other factors, including without limitation:
(a) normal wear and tear;
(b) abuse, mishandling, accident, or failure to follow operating instructions;
(c) exposure to liquid or infiltration of foreign particles;
(d) servicing or modifications of the product other than by Euhomy;
(e) commercial or non-household use.
The Euhomy warranty covers all costs related to restoring the proven defective product through repair or
replacement of any defective part and necessary labor so that it conforms to its original specifications. A
replacement product may be provided instead of repairing a defective product. Euhomy’ s exclusive
obligation under this warranty is limited to such repair or replacement. A receipt indicating the purchase
date is requied for any claim, so please keep all receipts in a safe place. Although greatly appreciated, the
product registration is not required to activate any warranty and product registration does not eliminate the
need for the original proof of purchase.The warranty becomes void if attmpts at repair are made by
non-authorized third parties and/or if spare parts, other than those provided by Euhomy, are used.
You may also arrange for service after the warranty expires at an additional cost. These are our general
terms for warranty service, but we always urge our customers to reach out to us with any issue, regardless
of warranty terms. If you have an issue with a Euhomy product, please contact us ([email protected]),
and we will do our best to resolve it for you.
10
PROBLEM
POSSIBLE CAUSES
SOLUTION
ADD WATER indicator
light turns on.
There is no indication
on the contral panel
The ice cubes stick
together
The ICE FULL
indicator light is on.
The unit does
notoperate.
Ice blockage. No ice
is being made.
ICE FULL and ADD
WATER indicators
light up simultaneously.
The ice-making cycle
seems normal but no
ice is produced.
The ice maker won’t
stop making ice
Direct or reflected sunlight can cause
the sensor to malfunction.
Move the ice maker to a darker
location.
Low water level or lack of water.
Plug disconnected.
Electrical power surge.
Air in the lines or the lines are
blocked. The water tank cannot
detect water level.
Turn off ice maker,unplug from electrical
outlet, refill water if required replace the
plug,the restart the unit.
Inspect relative parts.Remove the drain
cap on the back of the unit anddrain out a
small amount of water. Replace cap and
restart ice maker.
Check if ice is blocking the ice pusher.
Turn off the ice maker,let the ice melt,then
restart.
Check that the plug is plugged into
the electrical outlet.
Add water and the ice maker will
operate automatically
Replace the water with warmer water.
Stop the ice maker, wait for the ice to
melt, then restart the ice maker after
selecting SAMLL sized ice cubes.
Remove ice from the ice storage
basket to make more.
Turn off the machine.Start the machine
after the ice block melts.Or change the
size selector to small ice cubes.
There is refrigerant leakage. A pipe
in the cooling system is blocked.
The room temperature or water
temperature is too high.
The room temperature should be
50°F-105° F (10°-40.6° C), water
temperature should be 40° F - 90° F
(4.44° C - 32.2° C).
Consult a qualified technician or call
customer service
Power is not being supplied to the
unit. The ambient temperature or
the water temperature is too high.
Making ice takes too much time
Plug the unit into a standard 110/120
V60 Hz, power source. Please run the
ice maker in temperatures below 32°C
(90°F) and/or pour colder water into
the water reservoir.
The water temperature is too cold.
The ice making cycle is too long.
The ice basket is full.
:
:
Thank you for selecting our quality appliance. Please be sure to read this user manual
carefully before using. Any question, please contact the professional service for help.
Euhomy
Scan me
Like us
