Loading ...
Loading ...
IMPORTANT : THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
General
Unpack the heater carefully and retain the packaging for possible
future use, in the event of moving or returning the re to your supplier.
Loose coals (and or pebbles) are packed separately within the carton.
When the heater is assembled the coals (or pebbles) are placed on
top of the fuel bed.
The heater is designed for use inset into a 407mm (16”) or 457mm
(18”) wide by 559mm (22”) high replace opening see also section
‘Installation in a Fireplace Opening’.
A 2kW fan heater discreetly positioned in the canopy of the re provides
heating in cold weather. Switching allows half or full heat.
A minimum distance of 1 metre (39”) must be maintained between the
front of the heater and any surrounding furniture, overhanging curtains
or other obstructions.
To reduce heat loss and to prevent any chimney up draught affecting
the operation of your inset re we recommend that the chimney ue
is sealed off.
Before connecting the heater check that the supply voltage is the same
as that stated on the heater.
Please note: Used in an environment where background noise is very
low, it may be possible to hear a sound which is related to the operation
of the ame effect. This is normal and should not be a cause for concern.
Electrical
WARNING – THIS APPLIANCE MUST BE EARTHED.
This heater must be used on an AC ~ supply only and the voltage
marked on the heater must correspond to the supply voltage.
Before switching on, please read the safety warnings and operating
instructions.
MkII Inset Fire
Important Safety Advice
When using electrical appliances, basic
precautions should always be followed to
reduce the risk of re, electrical shock and
injury to persons, including the following:
If the appliance is damaged, check with
the supplier before installation and
operation.
Do not use outdoors.
Do not use in the immediate surroundings
of a bath, shower or swimming pool.
Do not locate the appliance immediately
below a xed socket outlet or connection
box.
This appliance can be used by children
aged from 8 years and above and persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved. Children
shall not play with the appliance. Cleaning
and user maintenance shall not be made
by Children without supervision.
Children of less than 3 years should
be kept away unless continuously
supervised. Children aged from 3 years
and less than 8 years shall only switch
on/off the appliance provided that it has
been placed or installed in its intended
normal operating position and they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understanding the hazards
involved. Children aged from 3 years
and less than 8 years shall not plug
in, regulate and clean the appliance or
perform user maintenance.
Do not use this appliance in series with
a thermal control, a program controller,
a timer or any other device that switches
on the heat automatically, since a re risk
exists when the appliance is accidentally
covered or displaced.
Ensure that furniture, curtains or other
combustible material are positioned no
closer than 1 metre from the appliance.
In the event of a fault unplug the
appliance.
Unplug the appliance when not required
for long periods.
Although this appliance complies with
safety standards, we do not recommend
its use on deep pile carpets or on long
hair type of rugs.
The appliance must be positioned so that
the plug is accessible.
If the supply cord is damaged it must be
replaced by the manufacturer or service
agent or a similarly qualied person in
order to avoid a hazard.
Keep the supply cord away from the front
of the appliance.
Warning: In order to avoid overheating,
do not cover the appliance. Do not place
material or garments on the appliance,
or obstruct the air circulation around
the appliance, for instance by curtains
or furniture, as this could cause
overheating and a re risk.
CAUTION - Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people
are present.
Warning: In order to avoid a hazard due
to inadvertent resetting of the thermal
cut-out, this appliance must not be
supplied through an external switching
device, such as a timer, or connected
to a circuit that is regularly switched on
ans off by the utility.
This appliance is not equipped with a
device to control the room temperture.
Do not use this appliancce in small
rooms when they are occupied by
persons not capable of leaving the
room on their own, unless constant
supervision is provided.
This instruction can be found at: WWW.
DIMPLEX.CO.UK
Loading ...