Loading ...
Loading ...
Loading ...
- 7 -
FIG. 3 FIG. 4
INDICATOR
LIGHT
HOOD CONTROL
Remote Control Functions (Fig.3)
See “Controls” section on previous page for
more information on each function.
Delay - O
Blower Speed Decrease and O
Blower Speed Increase and On
Light
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE. DISPOSE OF USED BATTERY TO
THE INSTRUCTION.
Battery disposal
When the batteries need to be replaced, dispose of them only and exclusively in the numerous readily
available special waste bins, especially in shops selling electronic consumer goods. Observance of the
regulations on di erentiated waste collection, in particular, proper disposal of used batteries, contributes to
preventing possible negative e ects on the environment and health.
REMOTE CONTROL
The remote control is linked to the hood at the factory.
If, for some reason, the link is lost - follow the directions below:
To Link Remote Control to Hood
1. Turn o hood motor and hood lights.
2. Press
and buttons on the remote simultaneaously for 5 seconds, until the remote
control Indicator Light turns on (Fig.3). Release
and buttons. Press and release
button to con rm the linking. At this point the remote control Indicator Light starts
ashing to con rm the link is active.
3. Within 3 seconds - press ƒ (P2) on the hood control (Fig. 4). The LED ring will light up for ap-
proximately 10 seconds to con m that the linking process was successful.
L1
LED
RING
Press (Delay) and (Light) together to Reset Filter Alarm.
IMPORTANT: holding
(Delay) for more than 3 seconds
will cause the link between the remote and hood to be lost.
Loading ...
Loading ...
Loading ...