Sun Joe ION8PS2-LT-RM 40-Volt iONMAX Cordless Mutli-Angle Pole Chain Saw Kit 8-Inch W/ 2.5-Ah Battery and Charger Certified Refurbished

User Manual - Page 15

For ION8PS2-LT-RM.

PDF File Manual, 28 pages, Read Online | Download pdf file

ION8PS2-LT-RM photo
Loading ...
Loading ...
Loading ...
15
4. When the bottom light turns green, the battery is fully
charged (Fig. 16).
NOTE: If the top light remains green while the bottom light
alternately ashes red and green, this indicates a temperature
abnormality (i.e. that the battery pack is either too hot or too
cold). If there is only a red blinking light, this indicates that
something is wrong with the battery. Contact Snow Joe
®
+
Sun Joe
®
customer service at 1-866-SNOWJOE
(1-866-766-9563).
5. A fully discharged pack with an internal temperature in the
normal range will fully charge in 1.5 to 2 hours (between
32ºF/0ºC and 113ºF/45ºC). Heavily cycled battery packs
may take longer to charge completely.
6. If the charging light indicator alternately blinks red and
green or the light indicator does not come on at all,
check that the battery pack is fully seated into the bay.
Remove the pack and reinsert. If the problem persists,
contact an authorized Snow Joe
®
+ Sun Joe
®
dealer or
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563) for assistance.
7. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger (Fig. 17).
8. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the battery.
Charging a Hot or Cold Battery Pack
A red and green ashing indicator light on the charger indicates
that the battery pack temperature is outside the charging
range. Once the pack is within the acceptable range, normal
charging will take place and the red light will be continuous.
Hot or cold battery packs may take longer to charge.
Operation
Starting the Machine
1. Insert the battery in its housing (Fig. 18).
Fig. 16
green
green
Fully charged
green
red
Charging
Green
Flashing red/green
Temperature abnormal
Flashing red only
Something is wrong
Fig. 17
Push lock button
Battery Pack
Temperature
Lithium-Ion Charging Status
Too hot Flashing Not charging
Normal range Continuous Normal charging
Too cold Flashing Not charging
Red Charger
Indicator Light
Charging
Status
Fig. 18
Battery
Loading ...
Loading ...
Loading ...